Sharp LC-60LE640X operation manual Removing the stand, Before setting TV on the wall

Appendix

Removing the stand

For wall mounting with the optional bracket (AN-52AG4) remove the stand.

Before setting TV on the wall

•Remove the connected cables (DVD, VCR, etc) from the terminals.

•Before performing work, make sure to turn off the TV.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

•Detach the four caps at the 4 locations on the rear of the TV.

1Unfasten the screws at the 4 locations on the rear of the stand.

2Detach the stand from the TV (hold the stand so it will not drop from the edge of the base area).

NOTE

•To attach the stand, perform the above steps in reverse order.

•As the TV is very heavy, be careful when moving it.

81