Basic adjustment
Range of OPC
The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of
f16.
NOTE
•This function is available only when the “OPC” setting is set to “On” or “On:Display”.
•The maximum setting cannot be set to a smaller number than the minimum setting.
•The minimum setting cannot be set to a bigger number than the maximum setting.
•The maximum and minimum settings cannot be set to the same number.
•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.
Audio settings
Go to “HOME” > “TV Menu” > “Setup” > “Audio”.
Menu
| CH list | Setup |
: Select | :Enter | :Back |
Audio
STANDARD
Auto volume
[Off]
Treble
Bass
Balance
L30 
R30
Audio
Auto volume
Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. This function reduces this problem by equalising levels.
High
Item
Strongly reduces the volume gaps among different sound sources.
Middle |
Low
Off
Slightly reduces the volume gaps among different sound sources.
Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with the following settings.
Item | c(Cursor) | d(Cursor) | |
Treble | For weaker treble | For stronger treble | |
|
|
| |
Bass | For weaker bass | For stronger bass | |
|
|
| |
Balance | Decrease audio | Decrease audio | |
from the right | |||
from the left speaker | |||
| speaker | ||
|
| ||
|
|
|
NOTE
•For resetting all adjustment items to factory preset values, press a/bto select “Reset”, press ?, press a/bto select “Yes”, and then press ?.
37