Network function
Connecting to the network
To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless.
NOTE
•If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
•If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company.
•An ETHERNET and wireless connection cannot be used at the same time. Use only one of the connection types.
•A stable connection speed is required to play back streaming content, otherwise you may not be able to watch normally.
Wired installation
Use an ETHERNET cable to connect the ETHERNET terminal on the TV to your broadcast router as shown below. This is recommended when enjoying services which require stable connection speeds, such as streaming media.
EWired connection overview
When using Easy setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting” > “Easy setup”.
4Press c/dto select “Yes”, and then press ?.
5 Press a/bto select “Wired”, and then press ?.
6Please input according to direction of a screen, and finally input “Complete”.
When using Manual setup function
ERefer to “How to connect”.
3Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Network setup” > “LAN setting” > “Manual setup” > select “Yes” > “Connection type”.
4Press c/dto select “Wired”, and then press ?.
5Select “OK” to confirm.
•The wired connection will be automatically established.
•If you have failed to connect to the internet in the above operation, an error message will appear. In this case, press bto return to the normal TV screen and check the relevant settings.
NOTE
•To change the settings manually, go to “HOME” > “Network setup” > “IP setup” and follow the
PC (home network server)
Router (commercially available)
ETHERNET cable (commercially available)
TV
Connection type
Wireless setup
IP setup
Setting Ethernet info. [Current setup]
IP address | : Auto |
Netmask | : Auto |
Gateway | : Auto |
DNS | : Auto |
MAC address : xx:xx:xx:xx:xx:xx
Network
EHow to connect
Router | ETHERNET terminal |
n
LAN
ETHERNET cable (commercially available)
1Switch on the router (commercially available). Refer to the router’s operation manual for switching on.
2Connect the ETHERNET terminal on the TV to the router (commercially available) with an ETHERNET cable (commercially available).
Change |
| Initialize |
Wireless installation
Use the wireless LAN USB adapter (optional accessory).
EWireless connection overview
PC (home network server)
Wireless LAN router/access point
Wireless LAN USB adapter (optional accessory) Network
50