Sharp LC-60LE640X operation manual Basic adjustment, Advanced

Page 38

Basic adjustment

Picture

Advanced

This TV provides various advanced functions for optimising the picture quality.

Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour using a six-colour adjustment system.

NOTE

This effect is greater on fast moving images.

This function will have no effect in the following cases.

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

If images appear blurred, set to “Off”.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e2 to a minimum of f2.

C.M.S.-saturation

This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.

C.M.S.-value

This function adjusts the brightness of a selected colour using a six-colour adjustment system.

Colour temp.

Adjusts the colour temperature to give the best white image.

 

Item

High

White with bluish tone.

 

 

Mid-High

Intermediate tone between “High” and

“Middle”.

 

 

 

Middle

Natural tone.

 

 

Mid-Low

Intermediate tone between “Middle” and

“Low”.

 

 

 

Low

White with reddish tone.

 

 

10 point setting*

Finely adjusts each colour temperature

between 1 to 10 points.

 

 

 

R/G/B Gain (LO),

Adjusts the white balance by changing the

R/G/B Gain (HI)

value of each item.

 

 

*“10 point setting” is available only when selecting “STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)” from the “AV mode” menu.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality.

 

Item

Advanced

Adjust effect to reduce judder from film

contents. Select a desired level of judder

 

reduction from 0 to +10.

Standard

Detects, analyses, converts film source.

Off

Normal viewing mode.

NOTE

Film mode is not selectable depending on the input signal type.

Active contrast

Automatically adjusts the contrast of an image according to the scene.

DNR (Digital Noise Reduction)

“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).

NOTE

This function may not be available depending on the input signal type.

AQUOMOTION

“AQUOMOTION” technologies provide superior solutions for digital display picture quality removing motion blur (“AquoMotion 200/240”, “High”, “Low”, “Off”).

36

Image 38
Contents LC-60LE640X Page Contents Dear Sharp customerAppendix Connecting a PCEnjoying 3D image viewing Introduction Precautions For Daily UseImportant safety precautions Precautions when transporting the TV Introduction3D Glasses Part name Part number Supplied accessoriesOptional accessories Anchoring the TV to the wall or a pillar PreparationProtection against overturning Fixing the TV to the tableAttaching the stand cover PreparationAttaching the stand unit Confirm that there are screws with the stand unitConnect the antenna cable Connecting the TVBundle the cables Connect external devicesInserting the batteries Using the remote control unitAngle of the remote control unit VOL + /− Part names and functionsTV front view Part names and functions TV rear viewRemote control unit Basic operation What is the HOME?Quick guide Regarding the instruction on the manualUse the software keyboard when you need to input text Using software keyboardUsing software keyboard Web browser Quick guideEChecking signal strength Initial auto installationChecking signal strength and channel strength DTV only Supplying power to the antenna DTV onlyWatching TV Turning on/off the power using the control panel of the TVTurning on/off the power using the remote control unit Daily operationProgramme info EUsing Info on the menu screenCH list Selecting an external video sourceTV mode of A2 TV broadcasts Watching TV Switching the digital audio format DTV onlySwitching the analogue audio format Nicam TV broadcastsText language Watching TVTeletext Initial teletext page DTV only MHEG-5 EPG DTV onlyDisplay range setup Useful settings for using EPGGenre icon setup EPG DTV onlyEClose the EPG screen Watching TV Selecting a programme using EPG DTV onlyBasic operation EDisplay the EPG screen Selecting a programmeSearch for a programme by date/time Display the timer list for TV programmesSearch a programme in a category Press a/bto select the desired programme, and then press ?ECancelling using B button on the remote control unit Watching TV Timer setup using EPGCancelling the timer setup Connecting external devices EBefore connectingHdmi connection Connecting external devicesVideo connections Connecting external devices PB PR Component connection Video connectionAudio connections EAfter connectingDigital audio output setting Speaker/amplifier connectionEWhat you can do with Aquos Link Controlling Hdmi devices using Aquos LinkEWhat is Aquos LINK? Select the device for recording from connected devices Aquos Link connectionRegarding Select recording device Press Return to end the operationOperating an Aquos Link device Use the following procedure to start playbackUse the following procedure to start recording Aquos Link menuBack panel vertical inputs Using a Smartphone with the TVConnection for using Audio return channel EAuto input selection EAuto power onEOperation Using the Remote Control AV mode Basic adjustmentPicture settings Picture adjustmentsBasic adjustment AdvancedAudio adjustment Audio settingsAuto volume Go to Home TV Menu Setup AudioClear voice SurroundBass enhancer This function produces a surround effect from the speakersPower save settings Programme setup Channel settingsAuto installation Digital setting DTV onlyAnalogue setting Buttons for Manual adjust operationSort TV Start-up time settingUseful viewing functions Erase programmeIndividual setting Password Individual setting TimeSubtitle DTV only Individual setting LanguageDigital audio language DTV only Time zone DTV onlySelecting the picture size manually Optional features settingsWide mode Selecting the WSS picture size automaticallySkipping specified inputs Setting audio inputMode Input skipSelecting the Hdmi picture size automatically Input labelHeadphone/Audio out select Hdmi auto viewPosition Headphone out settingAdjusting image position Colour systemPlaying Back Files from a Portable Device or PC Additional featuresNetwork function Wireless installation Connecting to the networkWired installation Network functionWhen using Easy setup function ERefer to How to connect Specifications Wireless LAN USB adapter Optional accessories Wireless LAN USB adapterPress a/b/c/dto select a function, and then press ? Using AQUOS.NETScreen for AQUOS.NET is displayed Screen for Enter address is displayedClear browser setting About linksDisclaimers Connecting a USB device Other useful featuresUsing a USB device USB storage device registrationTime shift + DTV only Other useful featuresDisconnecting the USB device EButtons for time shift operationTimer list Other useful features Time shift recordingTime shift timer setting Auto input selection Other useful features Time shift playbackJump time setting Display information regarding time shiftDevice registration Device checkUSB media/Home network Selecting the mode Common operationUSB media/Home network Other operationButtons for thumbnail operations When using USB media mode Other useful features Photo mode3D mode Viewing thumbnailsSlide show ESelecting the BGM Music modeButtons for music mode When using USB media mode Buttons for slide show BGM select operationEControl panel Other useful features Video modeButtons for playing mode When using USB media mode Viewing a videoUSB device compatibility DivXR setupSelecting the picture size for video mode Home network server compatibilityDisplaying a PC image on the screen Connecting a PCConnecting a PC Selecting the picture sizePC compatibility chart Connecting a PC Adjusting the PC image automaticallyAdjusting the PC image manually Auto syncConnecting a PC PC control of the TVConnecting a PC Command list Underscan AV/PCEnjoying 3D image viewing Display format for 3D and 2D imagesViewing 3D images Switching 3D to 2D modeEnjoying 3D image viewing 3D Menu 3D picture adjustments Switching to the previous modeAV mode EBasic operationEnjoying 3D image viewing 3D setup Troubleshooting 3D Images Problem Error code Possible solution TroubleshootingTroubleshooting Digital broadcasting AppendixAppendix ResetDownload setup Updating your TV via DVB-T DTV onlyReceiver report DTV only Message list DTV only Software updateGetting information Updating your TV via USB/Network IdentificationESoftware composition Information on the software licence for this productSoftware licence Trademarks Specifications VHF/UHFBefore setting TV on the wall Removing the standMounting the TV on a wall Hanging on the wall About setting the TV angleEWall mount audio setup Dimensional drawings Clearing the Password 1300 135