Enjoying 3D image viewing
3D setup |
|
| |
| 3D still image effect setting | ||
| Select the method for adjusting the 3D still image effect | ||
EBasic operation | |||
(depth). | |||
| |||
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected.
Item
| 3D mode is selected automatically when | |
Mode 1 | a 3D signal is detected while viewing | |
video from a VOD service or HDMI- | ||
| ||
| connected equipment. | |
|
| |
| 3D mode is selected automatically when, | |
| in addition to detecting a 3D signal while | |
Mode 2 | viewing video from a VOD service or | |
| ||
| pattern with “Side by Side” or “Top and | |
| Bottom” format is also detected. | |
|
| |
Off | Auto change is not performed. | |
|
|
NOTE
•3D signals may not be detected depending on the signal format.
3D depth control
Select the method for adjusting the 3D depth.
| Item | |
Auto | Adjusts the depth automatically. | |
|
| |
Manual | Manually adjusts the depth using the | |
function “Depth change”. | ||
| ||
|
|
Item
Auto | Adjusts the still image effect (depth) | |
automatically. | ||
| ||
|
| |
Manual | Manually adjust the still image effect | |
(depth). | ||
|
NOTE
•This function can be adjusted when viewing 3D still images in USB media mode.
•Even if you selected “Auto”, the 3D still image effect (depth) may not be correctly adjusted depending on the 3D still image.
•3D still images taken in macro mode will be displayed with excessive depth.
•If you experience discomfort while viewing 3D images, immediately discontinue viewing.
Viewing time info
This function allows you to display the elapsed time of 3D image viewing on the screen.
| Item |
Yes | The elapsed time is displayed in one- |
hour increments after you start watching | |
| 3D images. |
|
|
No | Hide the time. |
|
|
3D test
This function displays 3D images for testing the 3D operation. Clicking “Start” on the screen plays back 3D test images.
NOTE
•This function is only available when the input signal is 3D.
•This function is not displayed depending on the type of 3D signal.
NOTE
•If you press Bduring playback, the previous screen will be displayed.
Depth change
Adjusts the depth manually. “0” is the level where no adjustment is made.
NOTE
•This function is only available when “3D depth control” is "Manual".
2D s3D convert effect
You can adjust the 3D effect when converting images from 2D mode to 3D mode. Select a desired level of convert effect from e1 to e16.
NOTE
•This function is only available when converting 2D images to 3D images.
•When you use this function, image conversion on the TV will result in some differences in the original images and how they appear.
•2D images that have been converted to 3D images may be viewed only for personal use.
73