Sony SLV-X827MN manual Disabling unwanted programme positions, If the picture is not clear

Disabling unwanted programme positions

After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. You can also disable unwanted programme positions using the SET UP CH AND G-CODE menu (page 23).

1 In step 5 above, press programme number button “0” twice to display the number “0” beside CHANNEL SET.

2 Press EXECUTE.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.

1 Press PROG +/– to select the programme number for which you cannot obtain a clear picture.

2 Press MENU, then select TUNER PRESET and press EXECUTE.

3 Select FINE TUNING. The fine tuning meter appears.

Getting Started

TUNER PRESET		PROG14
SYSTEM
	B / G		D / K
NORMAL / CATV	NORM		CATV
AUTO PRESET
CHANNEL SET	3 5
AFT	ON		OFF
FINE TUNING

SET :

4 Press CURSOR ?// to get a clearer picture, then press EXECUTE.

Note that the AFT (Auto Fine Tuning) setting switches to OFF.

Note

•The menu disappears automatically if you don’t proceed for more than a few minutes.

Getting Started 17

SLV-X827MN 3-858-297-11 (1)