Sony SLV-X827MN manual How to connect to use this function, Operation

Page 29

Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play)

You can only use this function if your TV is made by Sony (Trinitron TV).

How to connect to use this function

Connect the VCR and TV with the audio/video cable (see “To a TV that has phono type audio/video input jacks” on page 9.) Be sure to connect the audio/video cable to the VIDEO IN 1 jacks on the TV if the TV has two inputs or more. The TV must be placed where it will respond to the remote commander while you are pointing it at the VCR.

Operation

Make sure that the TV’s power is in standby mode.

Press TRINITRON TV SYNCHRO PLAY and hold the remote commander in place for about two seconds.

The VCR and TV turn on, and the TV is set to VCR reception. If there is a tape in the VCR, playback starts automatically.

Notes

If the Trinitron TV Synchro Play function does not work properly:

Wait a few moments, and press the button again.

Replace both of the batteries with new ones, and press the button again.

Note that this function may not operate some Sony TVs because of the remote commander’s signal limitations.

Do not press TRINITRON TV SYNCHRO PLAY while playing back a video tape. If you do so, the TV’s input source will momentarily switch to the TV’s tuner.

Basic Operations

Basic Operations

29

SLV-X827MN 3-858-297-11 (1)

Image 29
Contents SLV-X827MN 3-858-297-11 Video Cassette RecorderSafety PrecautionsInstalling SLV-X827MNTable of contents Getting Started UnpackingUsing the remote commander Setting up the remote commanderInserting the batteries To operate SetSetting up the remote commander Controlling other TVs with the remote commanderCode numbers of controllable TVs TipTEAC67 Supplied Connecting the VCRMains lead To mains Signal flow Aerial cable To a TV that has audio/video input jacks Additional connectionsTo a stereo system Audio/video cableTuning your TV to the VCR To obtain a clear picture from the VCR To check to see if the TV tuning is correctBefore you start… Selecting a languagePresetting all receivable channels automatically Presetting channelsExecute Presetting channelsPROG+ Presetting channels manuallyChannel coverage System D/K System B/G Press Prog +/- to select the programme positionIf the picture is not clear Disabling unwanted programme positionsCode Setting upPress Cursor / twice to highlight Setting up G-CODE Setting up G-CODE for satellite broadcastsChanging programme positions Changing/ disabling programme positionsChanging/disabling programme positions To disable Setting the clock Press Execute to start the clock # Search · P L AY Stop E W Playing a tapeBasic Operations Replaying a recently watched scene Additional tasksTo set the colour system To play an NTSC-recorded tapeTo use the time counter Playing a tapeOperation How to connect to use this functionProg + REC Recording TV programmesTo check the remaining tape length To stop recordingTo watch another TV programme while recording To save a recordingTips Recording TV programmesTo record Ntsc colour system programmes Operations Recording TV Programmes Using G-CODETo record Select Recording TV programmes using G-CODETo record satellite broadcasts To use the VCR after setting the timerSetting the timer manually Daily/weekly recording To resume normal playback Playing/searching at various speedsAdditional Operations E W · P L a Y Playback options OperationReverse Tip Using the Click Shuttle ringSlow motion Reverse High speed To extend the duration Recording TV programmes using the quick timerChecking Changing/ cancelling timer settings Programme Will be Cut off Seconds will be cut off Checking/changing/cancelling timer settingsWhen the timer settings overlap Zweiton German stereo system Recording stereo and bilingual programmesNicam system To select bilingual sound while recordingHow sound is recorded on a video tape Selecting the sound during playbackRecording stereo and bilingual programmes Stereo Bilingual Usually mixed left Right channels= / + Searching using the index functionTo stop searching About Adaptive Picture Control APC Adjusting the pictureAdjusting the tracking Menu option Set this option to Changing menu optionsMenu choices How to connect to a stereo system How to connect to record on this VCRVMC-810MS audio/video cable Not supplied Signal flow Editing with another VCRTo stop editing Operation when recording on this VCRBefore you start editing Symptoms caused by contaminated video heads TroubleshootingRecording Timer recording Others Symptom Remedy Supplied accessories SpecificationsSystem Inputs and outputsFront panel Index to parts and controlsIndex to parts and controls Rear panelDisplay window Remote commander SLV-X827MN 3-858-297-11 V, W, X, Y Index