Sony SLV-X827MN manual Precautions, Safety, Installing, Compatible colour systems

Page 2

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The mains lead must only be changed at a qualified service shop.

Precautions

Safety

This unit operates on 110 – 240 V AC, 50/60 Hz. Check that the unit’s operating voltage is identical with your local power supply.

If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

The unit is not disconnected from the mains as long as it is connected to the mains, even if the unit itself has been turned off.

Unplug the unit from the mains if you do not intend to use it for an extended period of time. To disconnect the lead, pull it out by the plug, never by the lead.

Installing

Allow adequate air circulation to prevent internal heat buildup.

Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers.

Do not place heavy objects on the unit.

If the unit is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about one hour before operating the unit.

2Introduction

Caution

Television programmes, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner.

Compatible colour systems

This VCR is designed to record and play back using the PAL (B/G and D/K), MESECAM (B/G and D/K), and NTSC colour systems. Recording of video sources based on other colour systems cannot be guaranteed.

SLV-X827MN 3-858-297-11(1)

Image 2
Contents Video Cassette Recorder SLV-X827MN 3-858-297-11Installing PrecautionsSafety SLV-X827MNTable of contents Unpacking Getting StartedInserting the batteries Setting up the remote commanderUsing the remote commander To operate SetCode numbers of controllable TVs Controlling other TVs with the remote commanderSetting up the remote commander TipTEAC67 Supplied Connecting the VCRMains lead To mains Signal flow Aerial cable To a stereo system Additional connectionsTo a TV that has audio/video input jacks Audio/video cableTuning your TV to the VCR To check to see if the TV tuning is correct To obtain a clear picture from the VCRSelecting a language Before you start…Presetting channels Presetting all receivable channels automaticallyPresetting channels ExecutePresetting channels manually PROG+Press Prog +/- to select the programme position Channel coverage System D/K System B/GDisabling unwanted programme positions If the picture is not clearSetting up CodePress Cursor / twice to highlight Setting up G-CODE for satellite broadcasts Setting up G-CODEChanging/ disabling programme positions Changing programme positionsChanging/disabling programme positions To disable Setting the clock Press Execute to start the clock # Search · P L AY Stop E W Playing a tapeBasic Operations To set the colour system Additional tasksReplaying a recently watched scene To play an NTSC-recorded tapePlaying a tape To use the time counterHow to connect to use this function OperationRecording TV programmes Prog + RECTo watch another TV programme while recording To stop recordingTo check the remaining tape length To save a recordingTips Recording TV programmesTo record Ntsc colour system programmes Recording TV Programmes Using G-CODE OperationsRecording TV programmes using G-CODE To record SelectTo use the VCR after setting the timer To record satellite broadcastsSetting the timer manually Daily/weekly recording Additional Operations Playing/searching at various speedsTo resume normal playback E W · P L a Y Playback options OperationReverse Tip Using the Click Shuttle ringSlow motion Reverse High speed Recording TV programmes using the quick timer To extend the durationChecking Changing/ cancelling timer settings Programme Will be Cut off Seconds will be cut off Checking/changing/cancelling timer settingsWhen the timer settings overlap Nicam system Recording stereo and bilingual programmesZweiton German stereo system To select bilingual sound while recordingRecording stereo and bilingual programmes Selecting the sound during playbackHow sound is recorded on a video tape Stereo Bilingual Usually mixed left Right channels= / + Searching using the index functionTo stop searching About Adaptive Picture Control APC Adjusting the pictureAdjusting the tracking Menu option Set this option to Changing menu optionsMenu choices VMC-810MS audio/video cable Not supplied Signal flow How to connect to record on this VCRHow to connect to a stereo system Editing with another VCRTo stop editing Operation when recording on this VCRBefore you start editing Troubleshooting Symptoms caused by contaminated video headsRecording Timer recording Others Symptom Remedy System SpecificationsSupplied accessories Inputs and outputsIndex to parts and controls Front panelRear panel Index to parts and controlsDisplay window Remote commander SLV-X827MN 3-858-297-11 Index V, W, X, Y