Recording
Timer recording
Others
Symptom | Remedy | ||||||
No TV programmes appear | • Make sure the TV is set to the video channel. If you are | ||||||
| on the TV screen. | using a monitor, set it to video input. | |||||
|
|
|
|
|
|
|
|
TV reception is poor. | • Adjust the TV aerial. | ||||||
|
| • Make sure SYSTEM (B/G or D/K) in the TUNER | |||||
|
| PRESET menu is set to the system in your area. | |||||
|
|
|
|
|
|
|
|
The tape starts playing as soon | • The safety tab has been removed. To record on this | ||||||
as it is inserted. | tape, cover the tab hole. |
| |||||
The tape is ejected when you | • Check that the safety tab has not been removed. | ||||||
| press r REC. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nothing happens when you | • Make sure the tape is not at its end. | ||||||
press r REC. | • Select the correct source with the INPUT SELECT | ||||||
|
| button. Select a programme position when recording | |||||
|
| TV programmes; select “L1” or “L2” when recording | |||||
|
| from other equipment. | |||||
The timer does not operate. | • Check that the clock is set. | ||||||
|
| • Make sure a tape has been inserted. | |||||
|
| • Check that the safety tab has not been removed. | |||||
|
| • Make sure the tape is not at its end. | |||||
|
| • Make sure a programme has been set for timer | |||||
|
| recording. | |||||
|
| • Make sure your timer settings have not already passed | |||||
|
| the current time. | |||||
|
| • Check that the satellite tuner is turned on. | |||||
|
| • The clock stops if the VCR is disconnected from the | |||||
|
| mains for more than an hour. Reset the clock and timer. | |||||
No tape can be inserted. | • Check that a tape isn’t already in the tape | ||||||
|
| compartment. | |||||
|
|
|
|
|
|
|
|
The remote commander does | • Make sure you are pointing the remote commander at | ||||||
not function. | the remote sensor on the VCR. | ||||||
|
| • Replace all the batteries in the remote commander with | |||||
|
| new ones if they are weak. | |||||
|
| • Make sure the | TV | / | VIDEO | remote control switch is | |
|
| set correctly. |
|
|
|
| |
|
|
|
|
|
|
|
|
| You cannot control other TVs. | • Set your TV’s code number. The code number resets to | |||||
|
| 01 when you replace the batteries of the remote | |||||
|
| commander. | |||||
|
|
|
|
|
|
|
|
| The tracking indicator does not | • The recording condition of the tape is very poor and | |||||
| appear on the screen. | tracking cannot be adjusted, or the NTSC system is | |||||
|
| being used. | |||||
|
|
|
|
|
|
|
|
| The VCR needs to be cleaned. | • Clean the cabinet, panel and controls with a dry, soft | |||||
|
| cloth, or a soft cloth slightly moistened with a mild | |||||
|
| detergent solution. Do not use any type of solvent, | |||||
|
| such as alcohol or benzine. | |||||
|
|
|
|
|
| Additional Information |
51