Sony SLV-X827MN Controlling other TVs with the remote commander, Setting up the remote commander

Set TV / VIDEO at the top of the remote commander to TV .

Step 2: Setting up the remote commander (continued)

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer’s code number.

1

2 Hold down u, and enter your TV’s code number(s) using the number buttons. Then release u.

Now you can use the u, VOL +/–, PROG +/–, programme number buttons,

?(ten’s digit) and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot (•) to control a Sony TV. To control the VCR, reset TV / VIDEO to VIDEO .

Tip

•If you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer	Code number
Sony	01*1,02,03,04,05
Aiwa	32
Akai	68
Blaupunkt	10,21
Brionvega	40
C.G.M	09
Colonad	03
Dual	44
Emerson	03,04
Fenner	30,31
Ferguson	52
Gold Star	03,04,17
Grundig	10*1,11*1
Hitachi	24
Hyper	31

Manufacturer	Code number
Inno-Hit	41
Irradio	20
ITT/Nokia	15,16,69*3
JVC	33*1
Loewe	45
Mitsubishi	27*1,28*1,50*1,51*1
Mivar	09
NEC	66
Nordmende	35,42
Orion	47,48
Panasonic	17*1,49
Philips	06*1,07*1,08*1
Phonola	18,19
Pioneer	26

6

Getting Started

SLV-X827MN 3-858-297-11 (1)