Sony SLV-X827MN manual To record satellite broadcasts, To use the VCR after setting the timer

Page 35

To record satellite broadcasts

If you connect the satellite tuner and the VCR, you can record satellite programmes.

1 Turn on the satellite tuner.

2 On the satellite tuner, select the satellite programme for which you wish to make a timer setting.

3 Repeat the steps described above.

4 Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting.

To use the VCR after setting the timer

To use the VCR before a timer recording begins, just press u. The TIMER indicator turns off and the VCR switches on. Remember to press u to reset the VCR after using the VCR.

You can also do the following tasks while the VCR is recording:

Reset the counter.

Display tape information on the TV screen.

Check the timer settings.

Watch another TV programme.

Tip

• To cancel the procedure, press G-CODE before pressing SET.

Note

If the VCR beeps repeatedly, this means that:

The G-CODE number is incorrect.

ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or WEEKLY for a programme that airs more than seven days ahead.

Basic Operations

Basic Operations

35

SLV-X827MN 3-858-297-11 (1)

Image 35
Contents SLV-X827MN 3-858-297-11 Video Cassette RecorderSLV-X827MN PrecautionsSafety InstallingTable of contents Getting Started UnpackingTo operate Set Setting up the remote commanderUsing the remote commander Inserting the batteriesTip Controlling other TVs with the remote commanderSetting up the remote commander Code numbers of controllable TVsTEAC67 Supplied Connecting the VCRMains lead To mains Signal flow Aerial cable Audio/video cable Additional connectionsTo a TV that has audio/video input jacks To a stereo systemTuning your TV to the VCR To obtain a clear picture from the VCR To check to see if the TV tuning is correctBefore you start… Selecting a languagePresetting all receivable channels automatically Presetting channelsExecute Presetting channelsPROG+ Presetting channels manuallyChannel coverage System D/K System B/G Press Prog +/- to select the programme positionIf the picture is not clear Disabling unwanted programme positionsCode Setting upPress Cursor / twice to highlight Setting up G-CODE Setting up G-CODE for satellite broadcastsChanging programme positions Changing/ disabling programme positionsChanging/disabling programme positions To disable Setting the clock Press Execute to start the clock # Search · P L AY Stop E W Playing a tapeBasic Operations To play an NTSC-recorded tape Additional tasksReplaying a recently watched scene To set the colour systemTo use the time counter Playing a tapeOperation How to connect to use this functionProg + REC Recording TV programmesTo save a recording To stop recordingTo check the remaining tape length To watch another TV programme while recordingTips Recording TV programmesTo record Ntsc colour system programmes Operations Recording TV Programmes Using G-CODETo record Select Recording TV programmes using G-CODETo record satellite broadcasts To use the VCR after setting the timerSetting the timer manually Daily/weekly recording E W · P L a Y Playback options Operation Playing/searching at various speedsTo resume normal playback Additional OperationsReverse Tip Using the Click Shuttle ringSlow motion Reverse High speed To extend the duration Recording TV programmes using the quick timerChecking Changing/ cancelling timer settings Programme Will be Cut off Seconds will be cut off Checking/changing/cancelling timer settingsWhen the timer settings overlap To select bilingual sound while recording Recording stereo and bilingual programmesZweiton German stereo system Nicam systemStereo Bilingual Usually mixed left Right channels Selecting the sound during playbackHow sound is recorded on a video tape Recording stereo and bilingual programmes= / + Searching using the index functionTo stop searching About Adaptive Picture Control APC Adjusting the pictureAdjusting the tracking Menu option Set this option to Changing menu optionsMenu choices Editing with another VCR How to connect to record on this VCRHow to connect to a stereo system VMC-810MS audio/video cable Not supplied Signal flowTo stop editing Operation when recording on this VCRBefore you start editing Symptoms caused by contaminated video heads TroubleshootingRecording Timer recording Others Symptom Remedy Inputs and outputs SpecificationsSupplied accessories SystemFront panel Index to parts and controlsIndex to parts and controls Rear panelDisplay window Remote commander SLV-X827MN 3-858-297-11 V, W, X, Y Index