Sony SLV-X827MN Operation when recording on this VCR, Before you start editing, To stop editing

Page 49

Operation (when recording on this VCR)

Before you start editing

P PAUSE

 

• Turn on your TV and set it to the

 

video channel.

 

• Press INPUT SELECT to display “L2”

 

in the display window.

 

• Press TAPE SPEED to select the tape

 

speed (SP or LP for the PAL system,

r REC

and SP or EP for the NTSC system).

 

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press P PAUSE.

3 Press r REC on this VCR and set it to recording pause.

4 To start editing, press the P PAUSE buttons on both VCRs at the same time.

To stop editing

Press the p STOP buttons on both VCRs.

Tips

To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.

To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press P PAUSE again to resume recording.

Note

If you start recording following the procedure above, the VCR won’t start recording with the APC function. To record a tape with the APC function, press r REC again during recording pause in step 3 so that the VCR analyses the tape. Then when you start recording in step 4, press P PAUSE after the APC indicator stops flashing. If you press P PAUSE before the APC indicator stops flashing, the APC function is cancelled.

Additional Operations 49

SLV-X827MN 3-858-297-11 (1)

Image 49
Contents SLV-X827MN 3-858-297-11 Video Cassette RecorderSafety PrecautionsInstalling SLV-X827MNTable of contents Getting Started UnpackingUsing the remote commander Setting up the remote commanderInserting the batteries To operate SetSetting up the remote commander Controlling other TVs with the remote commanderCode numbers of controllable TVs TipTEAC67 Mains lead To mains Signal flow Aerial cable Connecting the VCRSupplied To a TV that has audio/video input jacks Additional connectionsTo a stereo system Audio/video cableTuning your TV to the VCR To obtain a clear picture from the VCR To check to see if the TV tuning is correctBefore you start… Selecting a languagePresetting all receivable channels automatically Presetting channelsExecute Presetting channelsPROG+ Presetting channels manuallyChannel coverage System D/K System B/G Press Prog +/- to select the programme positionIf the picture is not clear Disabling unwanted programme positionsCode Setting upPress Cursor / twice to highlight Setting up G-CODE Setting up G-CODE for satellite broadcastsChanging programme positions Changing/ disabling programme positionsChanging/disabling programme positions To disable Setting the clock Press Execute to start the clock Basic Operations Playing a tape# Search · P L AY Stop E W Replaying a recently watched scene Additional tasksTo set the colour system To play an NTSC-recorded tapeTo use the time counter Playing a tapeOperation How to connect to use this functionProg + REC Recording TV programmesTo check the remaining tape length To stop recordingTo watch another TV programme while recording To save a recordingTo record Ntsc colour system programmes Recording TV programmesTips Operations Recording TV Programmes Using G-CODETo record Select Recording TV programmes using G-CODETo record satellite broadcasts To use the VCR after setting the timerSetting the timer manually Daily/weekly recording To resume normal playback Playing/searching at various speedsAdditional Operations E W · P L a Y Playback options OperationSlow motion Reverse High speed Using the Click Shuttle ringReverse Tip To extend the duration Recording TV programmes using the quick timerChecking Changing/ cancelling timer settings When the timer settings overlap Checking/changing/cancelling timer settingsProgramme Will be Cut off Seconds will be cut off Zweiton German stereo system Recording stereo and bilingual programmesNicam system To select bilingual sound while recordingHow sound is recorded on a video tape Selecting the sound during playbackRecording stereo and bilingual programmes Stereo Bilingual Usually mixed left Right channelsTo stop searching Searching using the index function= / + Adjusting the tracking Adjusting the pictureAbout Adaptive Picture Control APC Menu choices Changing menu optionsMenu option Set this option to How to connect to a stereo system How to connect to record on this VCRVMC-810MS audio/video cable Not supplied Signal flow Editing with another VCRBefore you start editing Operation when recording on this VCRTo stop editing Symptoms caused by contaminated video heads TroubleshootingRecording Timer recording Others Symptom Remedy Supplied accessories SpecificationsSystem Inputs and outputsFront panel Index to parts and controlsIndex to parts and controls Rear panelDisplay window Remote commander SLV-X827MN 3-858-297-11 V, W, X, Y Index