Sylvania LC320SL8 Screen Information, Press Info, Broadcasting Information, Day of Memoriesi

Page 18

WATCHING TV

5Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

TV

In the analog mode, the current channel number and the audio mode are displayed.

Press [INFO].

6

SAP / STEREO

480ii SD 4:3:3

TV-PG DLSV CC

The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV rating are displayed at the top-right corner of the TV screen.

To clear the display, press [INFO] again. You can also press [BACK].

DTV

In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed.

Press [INFO] to display the details of the currently selected program.

[Broadcasting Information]

The following information is displayed.

1 program title

2 broadcast station

3 program guide

(The program guide added to broadcasting information is displayed. Maximum display of 4 lines.)

4 channel number

5 audio language

(Refer to “Switching Audio Mode” on page 17.)

6 effective scanning lines and scan mode

7 program format

8 program aspect ratio

9 program rating

10 CC (not available if CC is set to “Off”)

1

2

4

 

 

 

 

A Day of Memoriesi

KABC

 

 

 

 

A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues.Department stores and supermarket were

3

6-1

English 1/2

 

 

 

 

 

5

 

 

 

 

 

1080ii HD 16:9:9

 

 

 

 

 

 

TV-PG DLSV CC

 

6, 7, 8

 

 

 

 

 

 

 

 

 

9

10

 

 

 

Note:

• When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll.

• “No description provided” is displayed when the program guide is not provided.

• While the program guide is displayed, the closed caption function is interrupted.

• In external input mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO 1

input jack.

Video1

480ii SD

TV-PG DLSV CC

• Available languages differ depending on the broadcast.

• The information display will automatically disappear in 4 seconds.

• Pressing [AUDIO] does not control external audio device.

18

EN

Image 18
Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna LC320SL8Introduction Important note is located on the rear of the cabinetPrecautions RADIO-TV InterferenceRemote control Supplied AccessoriesSymbols Used in this Manual LocationFeatures ContentsDTV/TV/CATV Remote Control Function Installing the BatteriesControl Panel Rear PanelAntenna Cable Connection ConnectionBasic Connection Connection to Cable Box or Satellite BoxExternal Device Connection Hdmi ConnectionHDMI-DVI Connection Component Video Cable Connection Video Cable ConnectionVideo Connection Audio Output Connection DigitalAnalog Make sure if the unit is connected to antenna or cable Initial SettingInitial Setup Scanning and memorizing of channels start automaticallyMain Menu Auto Channel ScanPress Setup to exit Language SelectionLanguage 5Volume Adjustment Watching TVChannel Selection You can freeze the image shown on the TV screen Still ModeSwitching Each Mode To use the Hdmi in jack on the unit, select HdmiSAP Switching Audio ModeStereo MonoBroadcasting Information Screen InformationPress Info Day of MemoriesiTV Screen Display Mode Sleep Timer Press Sleep to set the sleep timerTo Cancel the Sleep Timer Optional Setting Channel List5Manual Register Antenna Confirmation AntennaPicture Adjustment Closed Caption DTV Closed Caption DTV CCUse Cursor K/L to select DTV CC, then press CC Style Font StyleFont Size Back Color Font ColorFont Opacity Back OpacityChip See the following description for setting each itemChipip Enter password Use Cursor K/L to select V-chip, then pressView and Block Press Setup to exitUse Cursor K/L to select Mpaa Rating, then press Enter To Set the Sub RatingsUse Cursor K/L to select New Password, then press Enter Chipip Enter password Confirm passwordHdmi Audio You can set the method of sound input for the Hdmi in jackUse Cursor K/L to select Hdmi Audio, then press Troubleshooting Troubleshooting GuideInterrupt the remote control signal of this unit Check the batteries of the remote controlRefer to IR Signal Check on Delayed behind the dialogueGlossary MaintenanceInformation AtscOther Specifications General SpecificationsElectrical Specification Cable Channel DesignationsLimited Warranty