Sylvania LC320SL8 owner manual Closed Caption

Page 24

OPTIONAL SETTING

5Closed Caption

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “DETAIL”, then press

[ENTER].

3 Use [Cursor K/L] to select “Closed Caption”, then press [ENTER].

[Caption Mode]

CC1 and Text1;

are the primary caption and text services.

The captioning or text is displayed in the same language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CC3 and Text3;

serve as the preferred data channels.

The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only in special conditions, such as when “CC1” and “CC3” or “Text1” and “Text3” are not available.

There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen immediately.

Pop-on mode:

Once characters are stored in memory, they are displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling (max. 4 lines).

Detailil

6

Press [SETUP] to exit.

Closed Caption

V–chip

HDMI Audio

Auto

4 Use [Cursor K/L] to select “Conventional CC”, then press [ENTER].

 

 

Closedl

Captioni

 

 

 

 

 

 

Conventional CC

Off

 

 

DTV CC

Off

 

 

CC Style

 

 

 

 

 

 

5 Use [Cursor K/L] to select the desired closed caption, then press [ENTER].

 

Closedl

Captioni

 

 

 

 

Conventional CC

Off

 

DTV CC

CC1

 

CC Style

CC2

 

 

 

CC3

 

 

 

CC4

 

 

 

Text1

 

 

 

Text2

 

 

 

Text3

 

 

 

Text4

Note:

To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

Not all TV programs and commercials have the closed caption or all types of the closed caption.

Captions and texts may not match the TV voice exactly.

Changing channels may delay the closed caption for a few seconds.

Adjusting or muting the volume may delay the closed caption for a few seconds.

Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a problem with the unit.

The caption or text characters will not be displayed while the main menu or functions display is shown.

If a black box appears on the TV screen, this means that the closed caption is set to TEXT mode. To clear the box, select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

-Automobile ignition noise

-Electric motor noise

-Weak signal reception

-Multiplex signal reception (ghosts or screen flutter)

The unit retains the closed caption setting if the power fails.

Closed caption will not be displayed when you are using an HDMI connection.

When the unit receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

24

EN

Image 24
Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna LC320SL8Introduction Important note is located on the rear of the cabinetPrecautions RADIO-TV InterferenceSupplied Accessories Symbols Used in this ManualRemote control LocationFeatures ContentsDTV/TV/CATV Remote Control Function Installing the BatteriesControl Panel Rear PanelConnection Basic ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxExternal Device Connection Hdmi ConnectionHDMI-DVI Connection Component Video Cable Connection Video Cable ConnectionVideo Connection Audio Output Connection DigitalAnalog Initial Setting Initial SetupMake sure if the unit is connected to antenna or cable Scanning and memorizing of channels start automaticallyMain Menu Auto Channel ScanPress Setup to exit Language SelectionLanguage 5Volume Adjustment Watching TVChannel Selection Still Mode Switching Each ModeYou can freeze the image shown on the TV screen To use the Hdmi in jack on the unit, select HdmiSwitching Audio Mode StereoSAP MonoScreen Information Press InfoBroadcasting Information Day of MemoriesiTV Screen Display Mode Sleep Timer Press Sleep to set the sleep timerTo Cancel the Sleep Timer Optional Setting Channel List5Manual Register Antenna Confirmation AntennaPicture Adjustment Closed Caption DTV Closed Caption DTV CCUse Cursor K/L to select DTV CC, then press CC Style Font StyleFont Size Font Color Font OpacityBack Color Back OpacitySee the following description for setting each item Chipip Enter passwordChip Use Cursor K/L to select V-chip, then pressPress Setup to exit Use Cursor K/L to select Mpaa Rating, then press EnterView and Block To Set the Sub RatingsUse Cursor K/L to select New Password, then press Enter Chipip Enter password Confirm passwordHdmi Audio You can set the method of sound input for the Hdmi in jackUse Cursor K/L to select Hdmi Audio, then press Troubleshooting Troubleshooting GuideCheck the batteries of the remote control Refer to IR Signal Check onInterrupt the remote control signal of this unit Delayed behind the dialogueMaintenance InformationGlossary AtscGeneral Specifications Electrical SpecificationOther Specifications Cable Channel DesignationsLimited Warranty