Sylvania LC320SL1 owner manual Channel List, Add Channels

Use ▲/▼ to select [Channel List], then press OK.

Use ▲/▼ to select [Add Channels], then press OK.

Use ▲/▼ to select [Setup], then press OK.

Use ▲/▼ to select [Setup], then press OK.

Press MENU to display the main menu.

Press MENU to display the main menu.

Channel List

The channels selected here can be skipped when selecting the channels using CH ▲/▼.

Those channels can still be selected with the Number buttons.

1

2

3

4 Use ▲/▼ to select the channel you want to remove, then press OK.

Add Channels

This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting.

1

2

3

4 Use the Number buttons to enter the number of the channel you want to add, then press OK.

Picture

Channel List

DTV 6.1

11

Sound

Setup

Features

Language

Highlight channels for Ch			27.1
Up / Down key selection.		DTV	8.1
			9.1
		DTV	48.1
			58.1
		DTV	67.1
Ch Select	Watch/Skip		Back

Picture

Sound

Setup

Features

Add Channels

Add Channels

For analog channels, select a channel to be added using number keys.

For digital channels, you must perform Autoprogram function.

•The channel display for the removed channel darkens. You will not be able to select the channel again using CH ▲/▼.

•To reactivate a removed channel, use ▲/▼ and press OK.The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

5 Press MENU to exit.

Note

•The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.

Language

Ch Change Back

5 Press MENU to exit.

Note

If setup completes successfully, [Added to the channel list] is displayed. If external input is used, it is not possible to register the channel and [Unavailable] will be displayed on the TV screen.

By using CH ▲/▼, you can select the memorized channels only.

20

EN