JVC AV-28E50SK, AV-32E50SK manual Picture Menu

Picture Menu			Center ￿value￿￿￿￿￿￿￿￿￿￿￿￿￿is indicated￿￿￿￿￿￿￿￿with two￿￿￿￿￿￿￿reciprocal arrows.
Press “MENU” button, now you are in main menu. In
the Main menu, select “Picture” using “ ” or “		” but-
ton, then enter the Picture menu by pressing “		” / “ ”
or “OK”￿button￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿.	￿￿￿￿￿￿￿￿￿￿

				Setting Picture Mode
				This item is used to change the picture mode. By press-
				ing “ ” or “ ” button you may select one of these
				options: STANDARD, SOFT and BRIGHT.
Setting Brightness				You can also set the Picture Mode by pressing the Blue
• As you enter the picture menu, Brightness will be the				button directly.
first selected option.				Setting Colour Temp
• Press “		” button to brighten the picture.		This item is used for white colour tint adjustment. By
• Press “		” button to darken the picture.		pressing “	” or “	” button you may select one of these
Setting	Contrast			options: COOL, NORMAL, WARM.
				Setting VNR (Video Noise Reduction)
Contrast is the difference and distribution of light and
				This item is used to reduce the image noise and im-
dark tones in an image.
• Using “		” or “	” button select Contrast.	prove the picture quality at weak signals.
				• Using “	” or “	” button select VNR.
• Press “		” button to increase contrast level.
• Press “		“ button to decrease contrast level.		• Press “ ”￿or “ ” button to set VNR level to OFF,
				MIN, AUTO or MAX.
Setting Colour
				AUTO adjusts the VNR level to OFF, MIN or MAX auto-
• Using “		” or “ ” button select Colour.		matically￿￿￿￿￿￿according￿￿￿￿￿￿￿￿to the intensity￿￿￿￿￿￿￿￿of the noise.
• Press “ ” button to increase colour saturation.
• Press “ ” button to decrease colour saturation.
Setting Sharpness
• Using “ ” or “ ” button select Sharpness.
• Press “ ” button to sharpen the picture.
• Press “ ” button to soften the picture.
Setting Tilt
				Setting VCR Mode (In AV mode only)
This function is used for tilt correction of the picture.
• Using “		” or “	” button select Tilt.	• Using “	” or “	” button select VCR Mode.
• Press “		” button to rotate the picture to the right.		• When you watch a picture from your VCR and the
• Press “		” button to rotate the picture to the left.		picture is unstable, you may improve it by changing
				the “VCR MODE” setting from “ON” to “OFF”.
Setting Hue (In AV mode only)				Reset
(During Playback NTSC system, this will appear in AV				Press BLUE button to reset the picture modes to fac-
mode only when NTSC video source is applied. Other-
				tory default settings.
wise, HUE option is invisible in Picture menu.):
				To Store the Settings
• Using “		” or “	” button select Hue.
• Press “		” button to increase the green tones.		In the Picture Menu, all settings are stored automati-
				cally.
• Press “ ” button to increase the red tones.
			- 17 -