JVC AV-28E50SK, AV-32E50SK manual Installation Menu

Selecting Country						Selecting Programme
• Using “	” or “		” button select Country.			To select programme number, you can use “ ” or “ ”
• Press “	” or “		” button to select the desired coun-			button or Digit Buttons.
try settings.						Selecting Band
Selecting Language						BAND, can be selected either “C” or “S” by pressing
Menu language can be selected by pressing “					” or	“ ” or “	” button.
“ ” button on		Language item.				Selecting Channel
Ext-2 Output						CHANNEL can be changed by “ ” or “			” button or
• Using “	” or “		” button select Ext-2 Output.			Digit Buttons.
• Press “ ” or “ ” button to select the source which						For band C,
						01 - 83, WEST EUROPE.
will be given. From Ext-2 output, either EXT-1, DTV,
EXT3 or TV can be selected.						01 - 12, 21 - 69, EAST EUROPE .
Blue Back						01 - 17, 21 - 73, UK.
You can set the TV to automatically change to a blue						01 - 76, FRANCE.
						04 - 09, FRANCE 2.
screen if the signal is weak or absent, or when there is
						For band S,
no input from an external device.
The Blue Background feature can be turned on or off						01 - 41, for all channel tables.
by pressing “		” or “ ” button.				Selecting Colour System
4:3 Auto Aspect						Using “ ” or “ ” button on Colour System, you can
You can choose one of three Zoom modes, REGULAR,						change the colour system to PAL, SECAM or AUTO.
PANORAMIC or 14:9 ZOOM, as the Zoom mode for the						Note: In EXT mode, you can choose NTSC 3.58 and
normal picture (4:3 aspect ratio).						NTSC 4.43 as well.
• Using “	” or “		” button select 4:3 Autoaspect.			Selecting Decoder (EXT2)
• Press “	” or “		” button to select a Zoom mode.			You can use this mode to connect any decoder to your
To Store Settings						TV.
In Feature menu all settings are stored automatically.						• Press the “ ” or “		” buttons to turn it on or off.
Installation Menu						When you turn Decoder on, EXT-2 output will be cho-
						sen as TV mode only and any scrambled channels will
• Press “MENU” button, now you are in MENU. In the						be unscrambled through decoder connected your TV
MENU, select INSTALLATION using “ ” or “					” but-	via EXT-2 output.
ton. Then enter the Installation menu by pressing “ ”						Decoder setting should be stored separately for each
or “ ”￿￿￿￿￿￿button.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿						programme.
						Selecting Fine Tuning
						You can use the Fine Tuning process for fine adjust-
	￿￿￿￿￿					ment (after coarse adjustment), if you are not happy
						with the image on the screen.
						Use “ ” or “ ” button on FINE TUNING item, until
						getting the best image on the screen.
						In Channel option, normally the Fine Tuning cursor is
						placed at the middle on the slider, and this is indicated
				￿￿￿
						with two reciprocal arrows.
			￿￿￿￿￿			Selecting Search
						• Using “	” or “ ” button select Search		item.
	￿￿￿￿￿￿					• Press “ ” or “ ” button in order to start channel
						search. “SEARCHING...” is displayed during the search
						process. Searching is stopped as soon as a station is
						found or “	”, “ ”, “	”, “ ” buttons are pressed.
					- 19 -