JVC AV-28E50SK, AV-32E50SK manual Installation, Setting the favourite channels, Automatic Search

1.Press the “” / “” buttons and choose Lock on the bar at the bottom of the screen.

2.Press the “” / “ ” buttons and choose the chan- nel to be locked, and then press the OK button.

The Enter PIN code input window appears.

3.Press the number buttons to input the correct PIN code.

If you have not changed the PIN code in the CON- FIGURATION menu’s “Enter PIN Code” (see page 14), input the PIN code you chose.

The lock icon appears next to the channel name in the Edit PR List.

When a locked channel is chosen, the Enter PIN code input window will appear. If the correct PIN code is input, the picture appears.

•When you forget the PIN code for the “Lock”, you can unlock locked channels by performing Automatic Search (see INSTALLATION ).

Setting the favourite channels

If only channels that you often watch are set as favourite channels, you can choose from just those channels by

pressing / .

•After setting the favourite channels, check the “Favourite Mode” in “Configuration” (see page 13) is set to ON.

1.Press the “” / “” buttons and choose Favourites on the bar at the bottom of the screen.

2.Press the “” / “ ” buttons and choose the chan- nel to be registered as a favourite channel, and then press the OK button.

The favourite icon ( ) appears on the right side of the chosen channel.

When you leave the Channel List screen by pressing “MENU”, the channel showing on the quarter screen is selected for normal viewing on the whole screen.

Installation

Although your TV will not lose its settings or stored channels when switched off, you may wish to re-install the programs because you have moved to a different area with different broadcast frequencies, you wish to reinstate a channel previously deleted from the channel list, or you want to watch new channels which have started broadcasting.

Display the DTV Menu and using the “” or “” but- tons, highlight the Installation line and press OK to dis- play the Installation Menu.

The Installation menu appears.

You can either select Factory Settings, effectively re- setting the receiver to its factory setting condition, or just search for channels.

Automatic Search:

The receiver can search for channels automatically (searching all the broadcast frequencies for free-to-air channels).

To perform Automatic search, Select Automatic Search with the “ ” or “ ” buttons and press OK. A warning

message is displayed￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

This starts the automatic tuning process and searches through all the available broadcast frequencies for free-

to-air channels.￿￿￿￿ ￿￿￿￿

Previous channels will be replaced on automatic search.

If no digital terrestrial television broadcasts are found, the TV will display￿￿￿￿￿￿a￿￿￿￿￿￿￿￿￿message:￿￿￿￿￿￿￿￿￿￿￿￿￿

When “OK” button is pressed, following message will appear on the right bottom￿￿￿￿￿￿￿￿￿￿￿￿￿side of the screen:

- 15 -