Sylvania SRCD223 Preparatin for USE, VHF Antenna Not supplied, UHF Antenna, LS RA,f LfN YZ

TD530XA/601XB 01-36 02.8.26 11:44 AM Page ii

46.ANT. in jack

Connect to an antenna, cable system, or satellite system.

4% Power cord

Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet.

48.COAXIAL digital audio out jack

Connect to the digital input of an external amplifier or decoder.

49.AUDIO I.JR output jack

Connect to the analog audio input of an external amplifier or decoder.

PREPARATI©N FOR USE

Satellite Box or	½
Cable Box (Not supplied)
	From Cable System or
	Satellite Dish

VHF/UHF Antenna

_ (Not supplied)

"VHF Antenna (Not supplied)

	75-ohm	[] lllllllllllllllgllill
Fromeable	Coaxial	II/I	L		UHF Antenna
					(Not supplied)
System	Cable	till
	(Not sup-	_m/_	m
				or	VHF/UHF
	plied)				Combiner
					(Not supplied)

Cab,etNet°1

suppled' 4

_ H_/L' H_ ,5Lt ARA f _: AA ? AA'A'AS

In some areas it will be necessary to use an outdoor antenna.

LS( RA,'_f) Lf:N Y(Z_

Use this connection if your cable system connects

directly to your TV/DVD/VHS without a converter box.

By using this connection you can:

1)Use the TV/DVD/VHS remote to select channels.

2)Program one or more unscrambled channels f'or

Automatic Timer Recording.

NOTE: This unit will ONLY record and view the same channel.

	J [Fig. 41
or	Flat twin-lead cable

(,4BLI: _I_H (.O:%! AA'TA/¢/

f AS(JCA,,_IffLf:_' f_O,_ OA' SA'LT_LLI'H_

f ox

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustratiom

By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This

means that channels cannot be changed using the

TV/DVD/VHS Remote Control. Unattended timer recording is limited to one channel at a time.

Antenna/Cable Connections

Continued on the Next Page.

- 11 - EN

IC29