Sylvania SRCD227, SRCD223 owner manual Ihrse,la p,erecorded ape

TD530XA/601XB 01-36 02.8.26 11:44 AM Page 26

Make sure ...

•TV/DVD/VHS power must be turned on.

Ihr_se,la p,erecorded _ape

If the erase-protection tab has been removed, the

TV/DVD/VHS will start playback automatically.

2_lb be_in? pli_yback Press the PLAY button.

3_lb _dop pll_¢yba©k

Press the STOP button when play- back is completed.

NOTES:

•If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.

•If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the

same function operates with the DVD side

PLAY button or OPEN/CLOSE button.

•Tracking adjustment will be set automatically

(Digital Tracking function) when you start play- back.

•However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the play- back picture. If this occurs, you can adjust the tracking control manually by pressing the CHAN- NEL • or • button until the streaks disappean To return to the DTR function, stop the tape once and start playback again.

•You can reduce the noise lines by pressing the CHANNEL • or • button in slow mode, too. Tracking adjustment in Slow mode will not be set

automatically_ NOTE:

•In Still mode, press the SLOW button and press the CHANNEL • or • button until streaks disappear. To return to Still mode, press the PAUSE button again.

-26

During pause, press the FWD button to reduce the

playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback.

NOTE: If it is left in the Slow mode for more than

five minutes, the TV/DVD/VHS will automatically go into the Stop mode.

This feature is very useful in finding or skipping over

a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

NOTE:

•If you press the EFWD or REW button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP / EJECT button once to stop it, twice to eject it.

2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only)

NOTE:

•Tapes recorded in the SP or LP mode will dis- play a noise bar on the TV screen and the picture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

You can view a still picture on the TV screen dining playback (the Still mode). Press the PAUSE button

during playback. Only tapes recorded in the SLP

mode will show the least amount of lines.Press the PLAY button to return to playback.

NOTES:

•You can advance the picture one frame at a time by pressing the PAUSE button during the Still mode.

•If it is left in the Pause mode for more than five

minutes, the TV/DVD/VHS will automatically switch to the Stop mode.

In the Pause!Still mode only, when the picture begins to vibrate vertically; stabilize the picture by pressing the CHANNEL • or • button.

NOTE:

If there are video noise lines on the screen, see Tracking

Adjustment section.

-EN IC29