Canon LV-X4 Connecting the AC Power Cord, For the U.S.A. and Canada For Continental Europe

Page 16

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power being supplied.

Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.)

CAUTION

For safety, unplug AC power cord when the projector is not in use. When this projector is connected to an outlet with AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect AC power cord (supplied) to the projector.

The AC outlet must be near this equipment and must be easily accessible.

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

	Projector side	AC outlet side
		For the U.S.A. and Canada	For Continental Europe
		Ground
	To power cord	To the AC outlet.	To the AC outlet.
	connector on your	To the AC outlet.
	connector on your	(120 V AC)
	projector.	(120 V AC)	(200 - 240 V AC)
	projector.		(200 - 240 V AC)

16

Image 16

Contents LV-X4 Features and Design Wide Zoom Lens User’s LogoTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions BottomService Port RGB IN-1/ ComponentAudio VideoTop Control LV-X4Remote Control Unit Signal Emission indicatorWireless Mouse Operation Pointer Function Remote Control Code Operating RangeRemote Control Battery Installation Adjustable Feet InstallationPositioning the Projector For the U.S.A. and Canada For Continental Europe Connecting the AC Power Cord200 240 V AC Connecting to a Computer Cables used for connectionConnecting to Video Equipment CableConnecting to Component Video Equipment What is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote Control UnitOn-Screen Menu Top ControlMenu Bar Image Select MenuKeystone Adjustment Zoom and Focus AdjustmentPicture Freeze Function Timer Function Sound AdjustmentVolume No Show FunctionComputer Input Input Source SelectionComputer System Selection AutoMode PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection StandardHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputInput button Video Computer Video button Input Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image button Standard Cinema BlackboardGreen CustomColor TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingEnter a Logo PIN code Change the Logo PIN codeLogo CapturePower management CeilingRear TerminalRemote control Lamp modePointer Key lock PIN code lockKey lock PIN code lockTo Change the PIN code lock setting Lamp counter resetFactory default To Change the PIN codeProjector is shut down and the Warning indicator lights red Maintenance and CleaningThen check the matters below Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control unit does not work. Check the batteries AppendixIndicators and Projector Condition Projector ConditionMenu Tree System Setting Image AdjustCompatible Computer Specifications ResolutionTechnical Specifications Accessories Configurations of Terminals USB Connector Series BOptional Parts This cable is used for RGB Scart 21-PinWhile the projector is locked with the PIN code Page Page Canon U.S.A., INC