|
|
|
|
|
|
|
| Part Names and Functions |
Terminal | q | w | e |
| r | t | y | Part |
|
|
|
|
|
|
|
| Names |
| RGB |
| AUDIO |
|
|
|
| and |
| COMPONENT IN | R | IN | L | VIDEO IN |
|
| |
| * | SERVICE PORT |
| COMPUTER |
| Functions | ||
|
|
|
|
|
| AUDIO IN |
|
|
|
| RESET |
|
|
|
|
|
|
|
|
|
|
|
| AUDIO OUT |
|
|
|
| RGB |
|
|
|
|
|
|
|
| RGB OUT |
|
|
|
|
|
|
ui o
qRGB IN-1/ COMPONENT IN
Connect output signal from a computer (Analog RGB) or video equipment (Component or RGB Scart) to this terminal. Optional cables are required when using this terminal as component input or RGB Scart
wSERVICE PORT
This jack is used to service this projector.
eAUDIO IN
Connect the audio output from video equipment connected to r or i to this jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p18)
rVIDEO IN
Connect the composite video output from video equipment to VIDEO jack. (p18)
tUSB (Series B)
When operating the connected computer with the remote control unit, connect USB port of your computer to this connector with a USB cable. (p17)
✽A
button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.
yCOMPUTER AUDIO IN
Connect the audio output (stereo) from a computer or video equipment connected to q or u to this jack. (p17,19)
uRGB IN-2 / RGB OUT
This terminal is switchable and can be used for input from a computer or output to the other monitor. Set the terminal up as either Computer input or Monitor output properly. (Used for Monitor out, this terminal outputs only incoming signal from RGB
i
Connect the
oAUDIO OUT
Connect an external audio amplifier to this jack. (p17,
18,19)
This terminal outputs sound from AUDIO IN terminal (e or y).
9