Canon LV-X4 Basic Operation, Turning On the Projector, Enter a PIN code, What is PIN code?

Page 20

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR,

 

etc.) before turning on the projector.

2

Connect the projector's AC power cord into an AC outlet.

 

The POWER indicator blinks red in a moment and lights red.

3

Press the POWER button on the top control or on the

 

remote control unit. The POWER indicator turns green

 

lighting and the cooling fans start to operate. The

 

preparation display appears on the screen and the count

 

down starts.

4

After the count-down, the image level that was selected last

 

and the Lamp mode status icon (see page 44) appear on the

screen.

Note:

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Select a number by pressing the Point 7 8 button and fix the number with the SET button. The number will change to "". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SET button so that you can start to operate the projector.

If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to PIN code lock function in Setting on page 45 and 46 for locking operation of the projector with your PIN code.

16

The preparation display disappears after 30 seconds.

Selected Image Level and Lamp Mode

Lamp mode

(See page 44 for Lamp mode.)

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

20

Image 20
Contents LV-X4 Features and Design Wide Zoom Lens User’s LogoTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communication Commission NoticePart Names and Functions BottomService Port RGB IN-1/ ComponentAudio VideoTop Control LV-X4Remote Control Unit Signal Emission indicatorWireless Mouse Operation Pointer FunctionRemote Control Code Operating RangeRemote Control Battery Installation Positioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe Connecting to a Computer Cables used for connectionConnecting to Video Equipment CableConnecting to Component Video Equipment What is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote Control UnitOn-Screen Menu Top ControlMenu Bar Image Select MenuPicture Freeze Function Zoom and Focus AdjustmentKeystone Adjustment Timer Function Sound AdjustmentVolume No Show FunctionComputer Input Input Source SelectionComputer System Selection AutoMode PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection StandardHigh contrast BlackboardGreenImage Level Adjustment Screen Size Adjustment Input button Video Computer Video button Video InputInput Source Selection Video, S-Video Input Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image button Standard Cinema BlackboardGreen CustomColor TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingEnter a Logo PIN code Change the Logo PIN codeLogo CapturePower management CeilingRear TerminalPointer Lamp modeRemote control Key lock PIN code lockKey lock PIN code lockTo Change the PIN code lock setting Lamp counter resetFactory default To Change the PIN codeThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control unit does not work. Check the batteries AppendixIndicators and Projector Condition Projector ConditionMenu Tree System Setting Image AdjustCompatible Computer Specifications ResolutionTechnical Specifications Accessories Configurations of Terminals USB Connector Series BOptional Parts This cable is used for RGB Scart 21-PinWhile the projector is locked with the PIN code Page Page Canon U.S.A., INC