Video Input
Input Source Selection (Video, S-Video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit.
Before using these buttons, correct input source should be selected through menu operation as described below.
Menu Operation
1 | Press the MENU button and the | ||
| appear. Press the Point 7 8 button to move the red frame | ||
| pointer to the Input Menu icon. | ||
2 | Press the Point d button to move the red arrow pointer to | ||
| Video and then press the SET button. The Source Select | ||
| Menu will appear. | ||
3 | Move the pointer to the source that you want to select and | ||
| then press the SET button. | ||
|
| When selecting Auto, the projector automatically | |
| Auto | ||
| detects incoming video signal, and adjusts itself to | ||
|
| ||
|
| optimize its performance. The projector selects | |
|
| connection in the following order: | |
|
| 1st | |
|
| 2nd Video | |
|
| The | |
|
| under the condition of connecting both the | |
|
| jack and the VIDEO jack. | |
|
| When video input signal is connected to the VIDEO | |
| Video | ||
| jack, select Video. | ||
|
| ||
|
| When video input signal is connected to the | |
| |||
jack, select | |||
|
|
✔Note:
When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. (p43)
INPUT button
Video
Computer 1
Computer 2 ✳
VIDEO button
Video
✳See Note on the bottom of this page.
Input Menu icon
Input Menu
| Move the pointer to |
| |
| |
VIDEO | Video and press the |
SET button. | |
| Source Select Menu (VIDEO) |
| Move the pointer to the |
| source that you want to |
| select and press the SET |
| button. |
34