Canon LV-X4 Air Circulation, Installing the Projector in Proper Position, Moving the Projector

Page 6

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable objects near the vent.

Keep the exhaust vent at least 3’(1m) away from any objects.

Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.

Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans.

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce

the lamp life and cause a fire hazard.

20˚

Do not tilt the projector more than 20 degrees above and below.

20˚

Do not point the projector up to

project an image.

Do not point the projector down to

project an image.

Do not put the projector on either

side to project an image.

Air Intake Vent

Exhaust Vent

Air Intake Vent

(Hot air exhaust)

 

Moving the Projector

When moving the projector, replace the Lens Cover and retract Adjustable Feet to prevent damage to the lens and cabinet.

When the projector is not in use for an extended period, put it into the case (carrying bag) supplied with the projector.

CAUTION

Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this bag, otherwise the projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet.

USE CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

Do not drop or bump a projector, otherwise damages or malfunctions may result.

When carrying a projector, use a suitable carrying case.

Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for their information.

6

Image 6
Contents LV-X4 Features and Design Wide Zoom Lens User’s LogoTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Installing the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions BottomAudio Service PortRGB IN-1/ Component VideoTop Control LV-X4Remote Control Unit Signal Emission indicatorWireless Mouse Operation Pointer FunctionRemote Control Code Operating RangeRemote Control Battery Installation Installation Adjustable FeetPositioning the Projector Connecting the AC Power Cord For the U.S.A. and Canada For Continental Europe200 240 V AC Connecting to a Computer Cables used for connectionConnecting to Video Equipment CableConnecting to Component Video Equipment Turning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Unit Top ControlMenu Bar Image Select MenuZoom and Focus Adjustment Keystone AdjustmentPicture Freeze Function Volume Timer FunctionSound Adjustment No Show FunctionComputer Input Input Source SelectionMode Computer System SelectionAuto PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment Display area ResetMode free Display area HHigh contrast Image Level SelectionStandard BlackboardGreenImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Input Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonAV System Menu Video or S-Video Video System SelectionAuto AV System Menu ComponentCinema Image button Standard Cinema BlackboardGreen CustomColor TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingLogo Enter a Logo PIN codeChange the Logo PIN code CaptureRear Power managementCeiling TerminalLamp mode Remote controlPointer Key lock Key lockPIN code lock PIN code lockFactory default To Change the PIN code lock settingLamp counter reset To Change the PIN codeMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the matters below Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control unit does not work. Check the batteries AppendixIndicators and Projector Condition Projector ConditionMenu Tree System Setting Image AdjustCompatible Computer Specifications ResolutionTechnical Specifications Accessories Optional Parts Configurations of TerminalsUSB Connector Series B This cable is used for RGB Scart 21-PinWhile the projector is locked with the PIN code Page Page Canon U.S.A., INC