Canon LV-7565F owner manual Basic Operation, Turning on / OFF Projector, Turning on Projector

Page 20

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on pages 12~14 for connecting that equipment.)

2

Connect a projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to page 39.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. Signal from PC or Video source appears after 30 seconds.

Current Input position and Lamp mode status are also displayed on screen for 5 seconds. (Refer to "LAMP MODE" on page 37.)

Input position and

Lamp mode status

30

Preparation Display disappears after 30 seconds.

 

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

 

Control Unit, and a message "Power off?" appears on a screen.

 

2

Press POWER ON-OFF button again to turn off projector. LAMP

 

Indicator lights bright and READY Indicator turns off. After

 

 

projector is turned off, Cooling Fans operate (for 90 seconds).

Message disappears after 4 seconds.

 

During this "Cooling Down" period, projector cannot be turned

 

 

 

on.

 

3

When projector has cooled down, READY Indicator lights

 

GREEN again and you can turn projector on. After cooling down

 

completely, disconnect AC Power Cord.

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN

PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE

TURNING IT OFF.

When “Power Management” function mode is Ready or Shut down, projector detects signal interruption and turns off the Projection Lamp automatically. Refer to “Power management” on page 39.

When WARNING TEMP. Indicator is flashing, projector cannot be turned on, refer to the section "MAINTENANCE" on page 42. When the both WARNING TEMP. and READY Indicator flashing, refer to the section "MAINTENANCE" on page 42.

Do not use the projector continuously for 24 hours or more. If using the projector continuously for long periods, turn it off and leave it for one hour at least once during a 24 hour period.

If you use the projector continuously for long period, it can excessively shorten the life of the lamp.

20

Image 20
Contents LV-7565 LV-7565F To the Owner Risk of Electric Shock Do not OpenSafety Instructions Compliances Federal Communication Commission NoticeTable of Contents Features and Design High Resolution ImagePreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Preparation Positioning Projector Room LightPreparation Adjustable Feet Installing Projector in Proper PositionPreparation Moving Projector Audio Input Jacks Connecting ProjectorTerminals of Projector A Projector Connecting to ComputerTerminals Connecting to Video Equipment VideoLaser Pointer Function Operation of Remote ControlBefore Operation Volume Button Wired Remote JackZoom Button Focus ButtonTOP Controls and Indicators Point Volume + / ButtonsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Guide Window Image Adjust Menu Sound MenuBefore Operation Menu BAR Basic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorPicture Freeze Function Adjusting ScreenKeystone Adjustment Sound Adjustment Selecting Computer System Computer InputSelecting Input Source PC System Menu Automatic MULTI-SCAN SystemAuto PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Picture Image Select Image Level Select DirectImage Level Select Menu Image Select MenuPicture Screen Adjustment Screen MenuVideo Input VideoComponent Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Provides image at a normal video aspect ratio of 4 Picture Image Picture Image AdjustmentsImage Adjust Menu Cancel List Cancel QuitQuit Color PaletteColor temp White balance RedWhite balance Green White balance BlueSetting Menu SettingSetting Menu Anamorphic Blue backDisplay Menu positionTo change the code of the Remote Control Unit Power managementRemote control To change the code of ProjectorUSB Wireless Mouse modeProjector mode Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Appendix AIR Filter Care and Cleaning Cleaning Projection LensLamp Replacement Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterTroubleshooting Remote Control Unit Wireless MouseDoes not work Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionAppendix Compatible Computer Specifications ResolutionAppendix Menu Tree PC sourceSystem Setting Sound Technical Specifications Computer INPUT-1 and Monitor OUT Terminals Analog Appendix Configurations of TerminalsUSB Connector Series B Appendix Optional Parts Lens ReplacementTo the sales and service engineer Appendix Canon U.S.A., INC