Canon LV-7565F owner manual Adjusting Screen, Keystone Adjustment, Picture Freeze Function

BASIC OPERATION

	ADJUSTING SCREEN
	ZOOM ADJUSTMENT
1	Press ZOOM button on Top Control or ZOOM ▲/▼ button on
	Remote Control Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button or POINT UP button to make image
	larger, and press ZOOM ▼ button or POINT DOWN button to
	make image smaller.	Message disappears after 4 seconds.
	FOCUS ADJUSTMENT
1	Press FOCUS button on Top Control or FOCUS ▲/▼ button on
	Remote Control Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button or
	POINT UP/DOWN button(s) .
	NOTE;	Message disappears after 4 seconds.
	Focus adjustment may not function properly if the image is
	corrected by KEYSTONE adjustment.
	LENS SHIFT ADJUSTMENT
1	Press LENS SHIFT button on Top Control or LENS SHIFT ▲/▼
	button on Remote Control Unit. Message “Lens shift” is
	displayed.
2	Press POINT UP button or LENS SHIFT ▲ button to move
	image up, press POINT DOWN or LENS SHIFT ▼ button to

move image down.

Message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1	Press KEYSTONE button on Remote Control Unit or select
	Keystone on SETTING menu. (Refer to page 37.) Keystone
	dialog box appears.
2	Correct keystone distortion by pressing POINT
	UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to

reduce the upper part of the image, and press POINT DOWN button to reduce the lower part. Press POINT LEFT button to reduce the left part, and press POINT RIGHT button to reduce the right part.

•Arrows are white in no correction.

•Arrow(s) of direction being corrected turn(s) red.

•Arrow(s) disappear(s) at the maximum correction.

•If you press the KEYSTONE button on Top Control or on Remote Control Unit once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

Reduce the upper width	Reduce the lower width	Reduce the left part with
with POINT UP button.	with POINT DOWN button.	POINT LEFT button.

Reduce the right part with POINT RIGHT button.

PICTURE FREEZE FUNCTION

Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button.

21