SETTING
SETTING MENU
1 | Press MENU button and |
POINT LEFT/RIGHT button(s) to move a | |
| SETTING icon. |
2 | Press POINT DOWN button to move a |
that you want to set and then press SET button. Setting dialog |
box appears.
Language
Language used in
Lamp mode
When selecting the Lamp mode, the projector reduce the brightness and set into the low power consumption mode.
Normal mode |
|
Auto mode | The brightness is adjusted automatically to a |
| level that is suitable for the screen. |
Silent mode | The brightness is reduced to 80% of Normal |
| mode. |
Keystone
When the image is distorted, select Keystone.
Store ··· Store the keystone adjustment data when disconnect AC Power Cord from an AC outlet.
Reset ··· Reset the keystone adjustment data when disconnect AC Power Cord from an AC outlet.
When a SET button is pressed, the mode changes to keystone adjustment mode. Correct keystone distortion by pressing POINT UP/DOWN/LEFT/RIGHT button(s). Refer to KEYSTONE ADJUSTMENT on page 21.
|
|
|
|
|
Aspect V |
|
|
| Aspect H |
These adjust the vertical and horizontal scale and position of the screen. Use the POINT RIGHT/LEFT button(s) to select Store or Reset.
Store ··· Store the adjustment data when disconnect AC Power Cord from an AC outlet.
Reset ··· Reset the adjustment data when disconnect AC Power Cord from an AC outlet.
When a SET button is pressed, the mode changes to Scale or Position adjustment mode. Use the POINT LEFT/RIGHT button(s) to select whether you wish to adjust Scale or Position, and then use the POINT UP/DOWN button(s) to adjust the values.
NOTE :
When the Aspect H/V is adjusted and the keystone adjustment is made, the adjustment data for the Aspect H/V is cleared.
To maintain the adjustment data, perform keystone adjustment first, and then adjust the Aspect H/V.
SETTING MENU
SETTING Menu icon
Set a red frame pointer to item and press SET button.
When pressing SET button at Language, Language Menu appears.
Move a pointer to item and then press POINT LEFT/RIGHT button(s).
37