Canon LV-7565F owner manual Sound Adjustment

BASIC OPERATION

TURBO BRIGHT FUNCTION

Turbo Bright System enhances picture brightness. When BRIGHT button is pressed to on, the message “Bright on” is displayed and BRIGHT button lights orange. To return to original picture brightness, press BRIGHT button again.

✽When Turbo Bright System is set to on, the color of image may change slightly.

Message disappears after 4 seconds.

NO SHOW FUNCTION

Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button.

Message disappears after 4 seconds.

P-TIMER FUNCTION

Press P-TIMER button on Remote Control unit. Timer display “00 : 00”

appears on screen and timer starts to count time (00 : 00 ~ 59 : 59).

To stop P-TIMER display, press P-TIMER button. And then, press P- TIMER button again to cancel P-TIMER function.

SOUND ADJUSTMENT

DIRECT OPERATION

Volume

Press VOLUME (+/–) button(s) on Top Control or on Remote Control Unit to adjust volume. Volume dialog box appears on screen for a few seconds.

(+) button to increase volume, and (–) button for decreasing.

Mute

Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/–) button(s).

Indicates roughly level of volume.

Press MUTE button to set

Mute function On or Off.

Display disappears after 4 seconds.

MENU OPERATION

1	Press MENU button and ON-SCREEN MENU will appear. Press		SOUND MENU
	POINT LEFT/RIGHT buttons to move a red frame pointer to
	SOUND Menu icon.
2	Press POINT UP/DOWN button to move a red frame pointer to
	item that you want to select, and then press SET button.			Indicates roughly SOUND Menu icon
				level of volume.
		Volume
			Close SOUND Menu.

To increase volume, press POINT RIGHT button, and press POINT

LEFT button for decreasing.

Built-in SP.

Press POINT LEFT/RIGHT button(s) to switch built-in speaker on and off.

Mute

Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box display is changed to “On” and sound is cut off. To restore sound to its previous level, press POINT LEFT/RIGHT button(s) again.

22