PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET
TOP CONTROLS
AND INDICATORS
PROJECTION LENS
|
|
|
| AIR INTAKE |
|
|
|
| VENT |
LENS COVER |
|
|
| INFRARED |
SPEAKERS | REMOTE RECEIVER | |||
BACK OF CABINET | POWER CORD | TERMINALS |
| INFRARED |
| CONNECTOR | AND CONNECTORS | ||
EXHAUST VENT | REMOTE RECEIVER | |||
|
|
|
| |
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When using or installing projector, following precautions should be taken.
●Do not put any flammable object near these vents.
●Keep rear grills at least 3.3’(1 m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.
This projector detects internal temperature and automatically controls operating power of Cooling Fans.
BOTTOM OF CABINET
LAMP COVER
When attached the Network Imager (optional part) to the projector, remove the these parts. Refer to the owner's manual in the optional Network Imager.
CARRYING
HANDLE
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover vent slots.
●Keep side clear of any objects. Obstructions may block cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7