COMPUTER INPUT
Display area
Selects area displayed with this projector. Select resolution at Display area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SET button.
Display area V
Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SET button.
Full screen
Press POINT LEFT/RIGHT button(s) to switch Full screen function to “On” or “Off.” Set “On” to resize image with 4 x 3 aspect ratio to fit screen. This function cannot be adjusted when “ON” is selected on Anamorphic function (P38).
NOTE : Fine sync, Display area, Display area H, Display area V and Full screen cannot be adjusted when “480p”, “575p”, “480i”, “575i”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P24).
3 |
|
|
|
|
|
| Store |
| |
|
|
| ||
| To store adjustment parameters, move a red frame pointer to | |||
| Store icon and then press SET button. Move a red arrow pointer | |||
| to any of Mode 1 to 5 that you want to store and then press SET | |||
| button. | |||
Mode free
To clear adjustment parameters previously set, move a red frame pointer to Mode free icon and then SET button. Move a red arrow pointer to Mode that you want to clear and then press SET button.
Other icons operates as follows.
Reset
Reset all adjust parameters on adjustment dialog box to previous figure.
Quit
Closes PC ADJUST MENU.
Press SET button at Display area icon and Display area dialog box appears.
Display area
Press POINT LEFT /RIGHT button(s) to adjust value and then press SET button.
To store adjustment data.
This Mode has parameters being stored.
Store icon Vacant Mode Shows values of “Total dots,” “Horizontal,” “Vertical,” “Display area H,” and “Display area V.”
To clear adjustment data.
Mode free icon | Close this dialog box. |
27