Tandy 16-289 owner manual Selecting TV or Video, Using Automatic and Manual Channel Programming

Page 13

16-289.fm Page 13 Tuesday, July 20, 1999 10:57 AM

SELECTING TV OR

VIDEO

Press TV/VIDEO on the remote control to view the selected input signal (TV) or the audio/video source connected to the TV’s input jacks (VIDEO).

USING AUTOMATIC AND MANUAL CHANNEL PROGRAMMING

When you turn on the TV for the first time, use the automatic channel pro- gramming feature to scan and memo- rize all active broadcast and cable channels in your area. If there are ad- ditional channels you want to add or delete, you can manually add or delete them.

Using Automatic

Programming

1.Press TV/VIDEO so TV is selected.

2.Press SET-UPon the remote con- trol or FUNCTION on the front panel until AUTO PROGRAM ap- pears on the screen.

3.Press VOL + or . The TV auto- matically scans and memorizes all active channels in your area.

Note: You can press any button on the remote control or front panel to stop automatic program- ming.

When the TV has scanned and stored all active channels, it stops on the nearest programmed chan- nel to where you started.

Now, when you press CH + or , the TV skips inactive channels.

Note: If the TV is unplugged for more than 24 hours, you must repeat auto- matic channel programming to restore channels in memory.

Manually Adding a Channel

To add a channel that was not stored during automatic programming, follow these steps.

1.Press TV/VIDEO so TV is selected.

13

Image 13
Contents Inch Color TV/Monitor Features Safety Precautions Contents Connecting an Outdoor Antenna Connecting AntennasGetting Started Choosing a LocationConnecting Cable TV Connecting Earphones Connecting AN AUDIO/VIDEO SourceConnecting Power Listening SafelyInstalling the Remote CONTROL’S Batteries Using the TV’S Front Panel Controls Using the TV’S ControlsChannel Selection Number But Using the Remote ControlUsing Auto Demonstration Selecting the Input Signal Setting the ON- Screen LanguageOperation Turning the TV ON/OFFUsing Automatic Programming Using Automatic and Manual Channel ProgrammingSelecting TV or Video Manually Adding a ChannelCable Manually Deleting a ChannelAuto Picture Control Adjusting PictureRefer to the following picture control chart Using Closed Captions Setting the Sleep TimerSpecial Functions Caption TipsFm Page 18 Tuesday, July 20, 1999 1057 AM Selecting the Caption Function Using the Text FunctionSelecting Text Problem Suggestion TroubleshootingCare and Maintenance FCC Information NTSC-M SpecificationsFm Page 25 Tuesday, July 20, 1999 1057 AM Fm Page 26 Tuesday, July 20, 1999 1057 AM Fm Page 27 Tuesday, July 20, 1999 1057 AM Radio Shack