Auto Picture Control, Adjusting Picture

16-289.fm Page 15 Tuesday, July 20, 1999 10:57 AM

5. Press VOL + or – so the arrow	appears. If you want to return to the
points to DELETE.	picture controls you previously select-
	ed, press APC until PICTURE RESET
	OFF appears.

6.The on-screen display automati- cally clears in about 5 seconds. Or, you can press RECALL to clear it. The channel is deleted.

AUTO PICTURE

CONTROL

Press APC on the remote control to display the Auto Picture Control status. When PICTURE RESET is set to ON, the TV’s picture shows the factory set- tings. If you adjust the picture, ON au- tomatically changes to OFF (see “Adjusting the Picture”).

If you have adjusted the picture and want to return to the factory settings, press APC until PICTURE RESET ON

ADJUSTING THE

PICTURE

Follow these steps to adjust the pic- ture’s contrast, brightness, color inten- sity, tint, and sharpness.

1.Press PICTURE on the remote control or FUNCTION on the front panel until the desired picture con- trol appears.

2.Adjust the selected control level by pressing VOL + or – .

The bar graph on the screen shows the relative adjustment level.