Tandy 16-289 owner manual Manually Deleting a Channel, Cable

16-289.fm Page 14 Tuesday, July 20, 1999 10:57 AM

2.Select the input signal (AIR or

CABLE).

3.Use the remote control’s number button(s) to select the channel you want to store.

4.Press SET-UPon the remote con- trol until the channel number, ADD, and DELETE appear on the screen.

5.Press VOL + or – so the arrow points to ADD.

6.The on-screen display automati- cally clears in about 5 seconds. Or, you can press RECALL to clear it. The channel is added.

14

Manually Deleting a Channel

If the TV stored a channel you do not want, follow these steps to delete the channel from memory.

1.Press TV/VIDEO so TV is selected.

2.Select the input signal (AIR or

CABLE).

3.Press CH + or – or the remote control’s number button(s) to se- lect the channel you want to de- lete.

4.Press SET-UPon the remote con- trol until the channel number, ADD, and DELETE appear on the screen.