7.3 Volume control
You have the facility to adjust the volume of your digital recei- ver. This makes operating the receiver even more conve- nient, since you can access all important functions from a single remote control, and will rarely have to use the remote control of your television set. When the digital receiver is switched on it will reproduce sound at the volume level last set.
>Adjust the volume of your digital receiver using the Volume + key to increase volume, and the Volume - key to make it softer.
>Press the Sound on/off key to switch the sound off (mute), press the same key again to switch the sound back on.
7.4 Selecting a different language
If a programme is broadcast in several languages, or with various soundtracks (Fig.
>Press the Language Select key. A list of languages currently broadcast will be displayed on screen
(Fig.
>Use the arrow keys up/down to select the desired language.
>Confirm by pressing OK.
You can now listen to the programme in the desired langua- ge. Your digital receiver can also receive mono broadcasts.
>Use the arrow keys right/left to choose between Mono Channel 1 ( 
), Mono Channel 2 ( 
) and Stereo ( 
).
7.4.1 Dolby Digital (AC3 mode)
If a programme is broadcast in Dolby Digital sound, this will be indicated by the Dolby logo in the information window when you switch to the programme. If the Dolby Digital (AC3) function has been enabled as per Point 6.3.6, this program- me will automatically be reproduced in this format.
If you have not switched on the function Dolby Digital (AC3), switch your receiver to
>Press the Language Select key. If available, a list of the languages currently being broadcast as well as Dolby Digital (AC 3) will be displayed on screen.
>Use the arrow keys up/down to mark the line
Dolby Digital.
>Confirm by pressing OK.
(Fig.
(Fig.