TechniSat DigiPal 2 manual Parental controlblocking programmes, Changing the receiver PIN code

Page 39
Press the Menu key to display the Main Menu.

Your receiver will now check whether SFI data is being received on the channel selected. This infroma- tion will be displayed along the bottom of the window.

Update time

>In the line Update time use the numeric keys to set the time at which you wish the automatic downlo- ad of SFI data to be performed.

Updating

>To download the data of the data channel, mark the line SFI Updating.

>Switch the function on by pressing OK .

If you do not wish to receive the additional data, or if you are unable to receive the data because of your location, the data reception function can also be switched off:

>Set the SFI Updating function to off, to switch off the data reception. Only the programme information provided by programme providers will then by availa- ble.

Starting download procedure manually

>To start the updating of SFI data manually, press the red function key Start now.

8.3 Parental control(blocking programmes)

Your unit is equipped with a parental control function. This means that important functions (e.g. calling up the manin menu) can be protected from unauthorised manipulation. In addition, programmes and recordings that you have specifi- cally blocked can only be accessed after entering a four-digit PIN code (unit PIN).

To work with the Parental Control menu proceed as fol- lows:

>

(Fig. 8-10)

> Use the arrow keys up/down to mark the line Settings.

> Confirm by pressing OK.

The sub-menu Settings will be displayed.

> Use the arrow keys up/down to mark the line Parental Control.

> Confirm by pressing OK.

The menu Parental Control will be displayed. (Fig. 8-10)

> Use the arrow keys up/down to move the marker withing the menu, and to change the individual posi- tions as indicated. When selecting a menu item, plea- se also note any messages displayed on the screen.

8.3.1 Changing the receiver PIN code

The receiver PIN code is set at the factory to 0000.

To change the receiver PIN code proceed as follows:

39

Image 39
Contents DigiPal Contents Page Page Illustrations Remote ControlVCR Page Important notes on operation Please read this firstWhen not in use Safety notesVCR Video cassette recorder VCR ConnectionsAntenna Connection to a television setSerial interface RS Getting started initial installationMains power connection Hi-fi amplifierMenu/OSD language Exiting from the installation assistant Time difference to GMT hours SettingsBasic settings Menu languageStand-by clock Remote control codeCountry Antenna feedVCR Scart mode Audio/Video settingsLanguage Audio signal TV Scart modeDolby Digital AC3 Antenna adjustmentSwitching on and off OperationProgramme selection Using the Programme up/down keysUsing the numeric keys Using the programme list NavigatorSelecting a list Calling up blocked programmesInformation box Volume control Dolby Digital AC3 modeSelecting a different language Additional Programme information TV/Radio switchingReturn to last programme selected Display time and programme informationVideo text Sleep timerChannel information Freeze frameSub-titles Electronic Programme Guide SFI Downloading SFI dataInterrupting the download Now Table of current programme contents Viewing the Electronic Programme GuideNext Marking a programme MoreSFI Functions SFI InformationSFI Programme overview SFI Timer programmingSFI overview by programme type catego Timer recording Manual timer programmingExiting SFI Page Programming a new timer event Timer overviewChanging timer programming Deleting timer programmingConfiguring the Favourites list Changing the basic programmingCalling up the Navigator Programme List Manager Adding programmes to the Favourites list Remove Programming the electronic programme guide Deleting from the Total listSorting programmes Please note Selecting a channelSFI Channel Start categoryChanging the receiver PIN code Parental controlblocking programmesSelecting a programme ModeAutomatic Scan Programme search scanChannel scan Expanded ScanAfter the scan Manual ScanService settings Activating default factory settingDelete all programmes Updating Software Copying settingsTechnical terms System configurationOSD Technical dataTV Scart BT.653-2 lines 6-22 Problem Possible cause Solution Trouble-shooting guidePage Page AC3 IndexVolume control Switching on and offProgramme selection Using the programme up/down keys Using the programme list