TechniSat DigiPal 2 manual Channel information, Freeze frame, Sleep timer, Video text

>Press the Info key once more to exit the information window.

7.9 Channel information

>Press the OK key

>Use the arrow keys up/down to mark the pro- gramme you wish to view informations.

>Press Option key to display the data of the channel currently selected. (Fig. 7-10)

>You may use the other coloured function keys to display Audio/Video information, Programme

	information and, where available, information on the
		(Fig. 7-10)
	Encryption system (CA) used.
>	Press Menu to return to normal operating mode.

7.10 Freeze frame

>Press the Stop key to freeze the current television image as a still image.

>Press the same key again to return to normal opera- tion.

7.11 Sleep timer

>Press the key Sleep timer several times to select the desired switch-off time of the receiver, from 15 minutes to 2 hours. At the end of the selected time, the receiver will switch off automatically, and go to stand-by mode.

7.12 Video text

7.12.1Using the video text decoder of your televi- sion set

Where broadcast by the provider, video text will be transfer- red to your television set. To operate the video text function, use the remote control of your television set. Should you experience problems with your television set, such as an overlap of video text and picture content, you should set your digital receiver to FBAS mode (Point 6.3.4).

7.12.2 Using the internal video text decoder

As an alternative, you can utilize the integrated TOP video text decoder to display information. The TOP video text system groups togetherall text pages in groups and blocks according to subjec matter, which makes the system more manageable.

>Select the programme on which you wish to view video text information.

23