TechniSat DigiPal 2 manual

>Press OK to go to the entry window used to program-

me a new timer event. (Fig. 7-20)

To programme a timer event, proceed as follows:

Source

>Use the arrow keys to mark the column Source.

>Press OK to enter the desired source (TV or Radio).

>Use the arrow keys up/down to mark the desired source (TV or Radio).

>Press OK.

> Use the arrow keys to mark the column Channel.

> Press OK.

Depending on the previous setting, either the TV or the radio programme list will now be displayed.

(Fig. 7-20)

> Use the arrow keys to mark the desired program- me.

> Use the arrow keys up/down to move the marker around the list one line at a time.

> Use the arrow keys right/left to move the marker backward or forward in the list one page at a time.

> Press OK to accept this into the timer programming.

Date

>Use the arrow keys to mark the column Date.

>Use the numeric keys to enter the date on which you wish to record a programme.

Start

>Use the arrow key right to mark the column

Start.

>In this line, use the numeric keys to enter the star- ting time for the timer.

Stop

>Repeat the steps as described under “Start” to enter the stopping time.

Repeat

>Use the arrow keys to mark the column Rep.

>Press OK.

A selection window will be displayed, offering various suggested repeating intervals.

1x Timer used once only T Daily repeat

1 W Repeat once weekly

1-5Repeat only on weekdays

6-7Repeat only on weekends

>Use the arrow keys up/down to select the desired function.

>Press OK to accept the setting into memory.

31