TechniSat 1 manual Parental control setting, Time difference GMT hrs, Country

Page 11

The menu Basic settings will be displayed.

>Use the arrow up/down keys to move the marker within the menu, and to change the individual settings as indicated. When selecting a menu item, please note any relevant information displayed on screen.

The following settings can be made:

5.2.1 Parental control setting:

Your unit can be set to resist unauthorised use by children. Any programmes that you have blocked in terms of the procedure in Points 7.2 or 7.3 can then only be viewed after entering a four-digit PIN number. When this line is marked, use the OK key to switch the parental control setting on or. off.

5.2.2 Time difference GMT (hrs.)

Your unit is equipped with a clock. This is synchronised, by means of satellite reception, with Greenwich Mean Time. Thus all you have to do is to correct the time in accordance with your local time by means of the OK key. For germany, this means +1 hour, and +2 hours during Daylight Savings time (summer).

5.2.3 Country

This function provides for automatic switching between summer and winter time, by country. Go to the line Country/State and use the arrow left/right keys to select your home

country.

As this information is currently not broadcast by all programme providers, we advise that you presently leave the setting at None.

>Press the Back key to return to the menu Settings or press the Menu key to return to normal operation. The settings are automatically stored in memory.

11

Image 11
Contents DigiBox1 TimerMONO1/MONO2 Remote control unitTable of contents Page Left/right Please read this first Safety notesImportant operating instructions Operational breaksDisposal instructions Necting the DVB receiver satellite installation Connections OSD Language InstallationBasic settings Country Parental control settingTime difference GMT hrs SCART-Mode Audio/Video settingsLanguage Audio signal Picture/image format of TV setLNB-Setting/Adjustment of external unit/satellite selection Additional settings Switch DiSEqC on or offSetting the switching matrix and the LNB properties Page Programme selection Switching on and offOperation Volume control Displaying clock and programme information Switching between TV and RadioSelecting a different language Going back to previous programme viewedAudio-Video Information Transponder InformationTeletext Electronic Programme GuideEPG Information TimerSwitching EPG off Programme preview for next few daysManual Programming/Changing timer settings Page Important Note Configuring programme listsChanging the basic programming Selecting a programme listEntering into the user programme list Entering programmes in the programme listSelecting programmes Select user listDeleting from user list Blocking programme access Parental control featureDeleting programmes Sorting programmesProgramme Search Cancelling blocking of individual programmesChanging the PIN Satellite Transponder After the scan Restore default basic programming/ Delete allManual Search Activating default setting Technical Terms System configurationModulation at 22 KHz Frequency rangeIntermediate Frequency if LNB/LNC Low Noise Block converterTechnical Data Output analogue Audio decodingMemory capacity Audio Parameters Input analoguePower supply Power supply switch Power consumption LNB Power supplyTimer Remote control system RC-5Problem Possible cause Solution Troubleshooting GuideDear customer Then For programme slot Then 3, then TV/Radio switchingBrief instructions for daily use For programme slot