TechniSat 1 manual Activating default setting

Page 30

>Use the arrow up/down keys to mark the line Settings.

>Confirm by pressing OK.

The sub.menu >Settings will be displayed.

>Now use the arrow up/down keys to mark the menu line Factory settings.

>Confirm by pressing OK.

The sub-menu >Factory settings will be displayed.

7.5.1 Activating default setting

This function allows you to go back to the default setting programmed in the factory, at the same time deleting your own settings.

>Use the arrow up/down keys to mark the menu line Restore Factory Set- tings.

>Press the OK key.

The prompt “Really restore factory settings?” will be displayed.

>Use the arrow left/right keys to select Yes or Abort.

>Confirm by pressing OK.

30

Image 30

Contents Timer DigiBox1Remote control unit MONO1/MONO2Table of contents Page Left/right Safety notes Please read this firstOperational breaks Disposal instructionsImportant operating instructions Necting the DVB receiver satellite installation Connections Installation Basic settingsOSD Language Parental control setting Time difference GMT hrsCountry Picture/image format of TV set Audio/Video settingsLanguage Audio signal SCART-ModeLNB-Setting/Adjustment of external unit/satellite selection Switch DiSEqC on or off Setting the switching matrix and the LNB propertiesAdditional settings Page Switching on and off OperationProgramme selection Volume control Going back to previous programme viewed Switching between TV and RadioSelecting a different language Displaying clock and programme informationElectronic Programme Guide Transponder InformationTeletext Audio-Video InformationProgramme preview for next few days TimerSwitching EPG off EPG InformationManual Programming/Changing timer settings Page Selecting a programme list Configuring programme listsChanging the basic programming Important NoteSelect user list Entering programmes in the programme listSelecting programmes Entering into the user programme listSorting programmes Blocking programme access Parental control featureDeleting programmes Deleting from user listCancelling blocking of individual programmes Changing the PINProgramme Search Satellite Transponder Restore default basic programming/ Delete all Manual SearchAfter the scan Activating default setting System configuration Technical TermsLNB/LNC Low Noise Block converter Frequency rangeIntermediate Frequency if Modulation at 22 KHzTechnical Data Audio Parameters Input analogue Audio decodingMemory capacity Output analogueRemote control system RC-5 LNB Power supplyTimer Power supply Power supply switch Power consumptionTroubleshooting Guide Problem Possible cause SolutionDear customer For programme slot TV/Radio switchingBrief instructions for daily use Then For programme slot Then 3, then