TechniSat 1 manual LNB-Setting/Adjustment of external unit/satellite selection

Page 13

5.4 LNB-Setting/Adjustment of external unit/satellite selection

Once you have adjusted the receiver to your personal preferences, you should now, if neces- sary, still adjust the receiver in accordance with your dish antenna. The receiver is pre-pro- grammed at the factory for reception of ASTRA and EUTELSAT by means of a Universal LNB (see annexure with technical terms. These programmes can be received without any further adjustments, if your receiving equipment permits this.

If, however, you wish to receive signals from another satellite, or if you are using a different type of LNB, then you must adjust the receiver as follows :

>Press the Menu, key in order to display the Main menu.

>Use the arrow up/down keys to mark the line Settings.

>Confirm by pressing OK.

The menu Settings will be displayed.

>Now mark the line LNB Settings by means of the arrow up/down keys.

>Confirm by pressing OK.

The menu LNB Settings will be displayed.

Image 13

Contents DigiBox1 TimerMONO1/MONO2 Remote control unitTable of contents Page Left/right Please read this first Safety notesDisposal instructions Operational breaksImportant operating instructions Necting the DVB receiver satellite installation Connections Basic settings InstallationOSD Language Time difference GMT hrs Parental control settingCountry Language Audio signal Audio/Video settingsPicture/image format of TV set SCART-ModeLNB-Setting/Adjustment of external unit/satellite selection Setting the switching matrix and the LNB properties Switch DiSEqC on or offAdditional settings Page Operation Switching on and offProgramme selection Volume control Selecting a different language Switching between TV and RadioGoing back to previous programme viewed Displaying clock and programme informationTeletext Transponder InformationElectronic Programme Guide Audio-Video InformationSwitching EPG off TimerProgramme preview for next few days EPG InformationManual Programming/Changing timer settings Page Changing the basic programming Configuring programme listsSelecting a programme list Important NoteSelecting programmes Entering programmes in the programme listSelect user list Entering into the user programme listDeleting programmes Blocking programme access Parental control featureSorting programmes Deleting from user listChanging the PIN Cancelling blocking of individual programmesProgramme Search Satellite Transponder Manual Search Restore default basic programming/ Delete allAfter the scan Activating default setting Technical Terms System configurationIntermediate Frequency if Frequency rangeLNB/LNC Low Noise Block converter Modulation at 22 KHzTechnical Data Memory capacity Audio decodingAudio Parameters Input analogue Output analogueTimer LNB Power supplyRemote control system RC-5 Power supply Power supply switch Power consumptionProblem Possible cause Solution Troubleshooting GuideDear customer Brief instructions for daily use TV/Radio switchingFor programme slot Then For programme slot Then 3, then