TechniSat 1 manual Please read this first, Safety notes

Page 6

3 Please read this first

NOTE:English speaking customers - the default setting of your receiver is German. You should go directly to chapter 5 to change the setting to English (point 5.1 on page 10)

>Before setting up and connecting your equipment, check whether you have received all items that should have been supplied with the unit.

The following items are supplied as standard:

1 Receiver

1 mains cable

1 remote control unit

1 operating manual

1 guarantee card

2 batteries (1,5V microcells AAA).

>Insert the batteries supplied in the battery compartment of the remote control unit, ensuring polarity as indicated.

>Before connecting the receiver, please read the safety notes as set out in Chapter 3.

>Chapters 4 and 5 describe the connection and adjustment of the receiver to the external unit (dish antenna, LNB, etc.), to the TV set, VCR, etc. These settings and adjustments need only be carried out once, and need only be modified if and when there is a change in your external unit, or when additional equipment is connected.

>Chapter 6 describes all functions required for everyday use, such as programme selection or setting the volume.

>In Chapter 7 you will find information on how to set new programmes, and on how to change the order of programmes in the list.

>The technical terms used in the operating manual are explained in Chapter 8.

>The technical data can be found in Chapter 9.

>A troubleshooting guide, assisting you to identify and overcome faults can be found in Chapter 10.

Safety notes:

For your own protection, you should read these safety notes carefully before operating your new receiver.

The manufacturer cannot be held responsible for damage occurring through non-observance of the safety precautions described, or through inappropriate or improper handling and ope- ration.

>In order to ensure adequate circulation of air, place the unit on a smooth, even surfa- ce, and do not place any objects on top of the unit, as this contains circulation slits which conduct heat away from the interior of the unit.

>Do not place any burning objects, such as a lit candle, on top of the unit.

>Do not subject the unit to water or extreme humidity, and do not place any liquid-filled containers, such as vases, on top of the unit.

6

Image 6
Contents Timer DigiBox1Remote control unit MONO1/MONO2Table of contents Page Left/right Safety notes Please read this firstOperational breaks Disposal instructionsImportant operating instructions Necting the DVB receiver satellite installation Connections Installation Basic settingsOSD Language Parental control setting Time difference GMT hrsCountry Picture/image format of TV set Audio/Video settingsLanguage Audio signal SCART-ModeLNB-Setting/Adjustment of external unit/satellite selection Switch DiSEqC on or off Setting the switching matrix and the LNB propertiesAdditional settings Page Switching on and off OperationProgramme selection Volume control Going back to previous programme viewed Switching between TV and RadioSelecting a different language Displaying clock and programme informationElectronic Programme Guide Transponder InformationTeletext Audio-Video InformationProgramme preview for next few days TimerSwitching EPG off EPG InformationManual Programming/Changing timer settings Page Selecting a programme list Configuring programme listsChanging the basic programming Important NoteSelect user list Entering programmes in the programme listSelecting programmes Entering into the user programme listSorting programmes Blocking programme access Parental control featureDeleting programmes Deleting from user listCancelling blocking of individual programmes Changing the PINProgramme Search Satellite Transponder Restore default basic programming/ Delete all Manual SearchAfter the scan Activating default setting System configuration Technical TermsLNB/LNC Low Noise Block converter Frequency rangeIntermediate Frequency if Modulation at 22 KHzTechnical Data Audio Parameters Input analogue Audio decodingMemory capacity Output analogueRemote control system RC-5 LNB Power supplyTimer Power supply Power supply switch Power consumptionTroubleshooting Guide Problem Possible cause SolutionDear customer For programme slot TV/Radio switchingBrief instructions for daily use Then For programme slot Then 3, then