TechniSat 1 LNB Power supply, Programme memory/Satellite positions, EPG Data, Timer, General

Page 35

LNB Power supply:

LNB current

400 mA max.; double insulated

LNB voltage vertical

<14,0V no load, > 11,5 V at 400 mA

LNB voltage horizontal

< 20V no load, > 17,2 V at 400 mA

 

LNB switched off in standby mode

22 kHz-Modulation:

22 kHz, amplitude 0.6 V +/- 0.2 V

Programme memory/Satellite positions:

500 TV programmes

500 RADIO programmes

Number of active satellite positions:

max.4 (DiSEqC 1.0, SAT POSITION / SAT OPTION)

EPG Data:

EPG preview

Timer:

32 events, up to 1 year ahead

OSD Languages:

German, English

Remote control system:

RC-5

Modulation frequency

36 kHz

 

Infrared wavelength

950 nm

 

Power supply:

Power supply switch:

Power consumption:

<11,5 W (in operation, horizontal polarisation / 400 mA LNB current

<9,5 W (in operation, without LNB)

<8,3 W (Standby mode)

Input voltage:

180 V.... 250 V / 47...63 Hz alternate current

General:

Ambient temperature

+15°C...+35°C

Humidity

< 80%

Dimensions(WxDxH):

305 mm x 135 mm x 65 mm

Weight/mass:

0,8 kg

35

Image 35
Contents DigiBox1 TimerMONO1/MONO2 Remote control unitTable of contents Page Left/right Please read this first Safety notesImportant operating instructions Operational breaksDisposal instructions Necting the DVB receiver satellite installation Connections OSD Language InstallationBasic settings Country Parental control settingTime difference GMT hrs SCART-Mode Audio/Video settingsLanguage Audio signal Picture/image format of TV setLNB-Setting/Adjustment of external unit/satellite selection Additional settings Switch DiSEqC on or offSetting the switching matrix and the LNB properties Page Programme selection Switching on and offOperation Volume control Displaying clock and programme information Switching between TV and RadioSelecting a different language Going back to previous programme viewedAudio-Video Information Transponder InformationTeletext Electronic Programme GuideEPG Information TimerSwitching EPG off Programme preview for next few daysManual Programming/Changing timer settings Page Important Note Configuring programme listsChanging the basic programming Selecting a programme listEntering into the user programme list Entering programmes in the programme listSelecting programmes Select user listDeleting from user list Blocking programme access Parental control featureDeleting programmes Sorting programmesProgramme Search Cancelling blocking of individual programmesChanging the PIN Satellite Transponder After the scan Restore default basic programming/ Delete allManual Search Activating default setting Technical Terms System configurationModulation at 22 KHz Frequency rangeIntermediate Frequency if LNB/LNC Low Noise Block converterTechnical Data Output analogue Audio decodingMemory capacity Audio Parameters Input analoguePower supply Power supply switch Power consumption LNB Power supplyTimer Remote control system RC-5Problem Possible cause Solution Troubleshooting GuideDear customer Then For programme slot Then 3, then TV/Radio switchingBrief instructions for daily use For programme slot