SPECIAL FUNCTIONS
The following information describes some of your TV/VCR’s special
THINGS YOU SEE
Blue Screen
The TV/VCR displays a blue screen when you select the menu, play unrecorded portions of a tape, or when you tune to a weak TV station.
Function Indicators
When you press a function button (such as STOP), the selected function’s indicator appears on the TV screen.
Note: If you play back a poor quality (worn) or damaged tape, the function indicator might not appear on the TV screen.
When you change the channel, the new channel number appears on the TV screen for about 4 seconds.
On-Screen Displays
To view your TV/VCR’s current operating mode and other information about your TV/VCR, press DISPLAY on the remote control during playback or while watching TV. You see this information on the TV screen.
•Function indicator (if a tape is loaded)
•Time
•Channel or (if station name is broadcast) station name
•Tape counter
•Tape speed
•Remaining QTR time (if programmed)
Function Indicator Time | Channel or | |
| Station Name | |
Remaining | WNET | |
QTR Time | ||
0 : 00 : 0 0 | ||
| ||
| SLP | |
| Tape | |
Tape | Speed | |
Counter |
|
Press DISPLAY again to clear the information from the screen.
Note: If you change the channel while informa- tion is displayed, all information except the channel number disappears. Then, after about 4 seconds, the information reappears.
USING THE COUNTER
Your TV/VCR’s counter shows how long a tape has been running, in hours, minutes, and sec- onds. To display the counter, press DISPLAY on the remote control.
Notes:
•Because the TV/VCR’s counter reads spe- cial signals recorded on the tape, the counter might stop while you
•To reset the counter to 0:00:00, press COUNTER RESET on the remote control.
Follow these steps to easily return to a selected point on the tape.
1.During playback, press DISPLAY on the remote control.
2.When you see the location on the tape that you want to return to later, press COUNTER RESET on the remote control. The TV/VCR displays 0:00:00 on the TV screen.
3.To return to the location you selected in Step 2, press STOP then ZERO/1 MIN. The tape
Note: The tape usually stops exactly at 0:00:00. However, depending on the tape you use, it might stop a few seconds sooner or later.
21