3.If necessary, press SEL 
or SEL 
on the remote control to highlight ANTENNA SYSTEM:, then press SET to display the broadcast system (TV or CATV).
4.Press SEL 
to highlight AUTO SET, then press SET. CH AUTO SET PROCEEDING appears, and the TV/VCR’s tuner scans through the channels (TV or CATV) and stores all the active channels in your area. The currently tuned channel number appears on the TV screen. After scanning all the channels, CH AUTO SET COMPLE- TED appears, and the tuner stops on the
5.To review the stored channels, repeatedly
press CH 
or CH 
on the remote con- trol.
Note: You can directly select channels that are not stored in the tuner’s memory by using the remote control’s number buttons.
Adding/Erasing Channels
If a channel you want was not stored, or if a channel you do not want was stored, follow these steps to add or erase it.
1.Repeatedly press CH 
or CH 
or use the number keys on the remote control to enter the channel number you want to add or erase.
Notes:
•You must use the number keys to select a channel that is not stored.
•To enter a
•Precede a
2.Press ADD/DLT on the remote control to add or delete the channel. CHANNEL and the channel number and ADDED or DE- LETED appears on the TV screen.
CHANNEL 08 DELE TED
or
CHANNEL 08 ADDED
Setting the Clock Manually
If the TV/VCR did not automatically set the clock, or if there is no EDS broadcast station in your area, you must manually set the clock. We suggest you use another TV or a radio station as your time source.
Follow these steps to set the clock manually.
1.Press MENU to display the main menu.
2.Repeatedly press SEL 
or SEL 
on the remote control to select CLOCK, then press SET. The SET CLOCK screen appears on the TV screen.
3.Press SEL 
or SEL 
on the remote con- trol to highlight MANUAL SET, then press SET. The next SET CLOCK screen ap- pears on the TV screen.
4.Repeatedly press SET until the month digit flashes.
SET CLOCK
1 / / | : | |
|
| DST : ON |
|
| |
|
| |
SELE CT MONTH
BY SELECT 
/ 
KEY
: PUSH SET
TO END PUSH MENU KEY
15