PC Setup
You can adjust horizontal/vertical posi- tion, clock, phase, and
Press the MENU button and then D / E button to select the SPECIAL menu.
Press the G button and then D / E but- ton to select the desired picture item.
Press the F / G button to make appro- priate adjustments.
This function is to adjust picture to left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Auto-configure
This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a few seconds while the
Reset
This function allows you to return to the good picture reproduction pro- grammed at the factory and cannot be changed.
Note : Some signal from some graph- ics boards may not function properly. If the results are unsatisfactory, adjust your monitor’s position, clock and phase manually.
Press the OK button to store it for the PC monitor picture.
Press the EXIT button to return to PC mode.
WXGA or VGA (Only RGB [DVI] mode)
When the set is inputted
Press the MENU button and then
D/ E button to select the SPE- CIAL menu.
Press the G button and then D / E button to select WXGA.
Press the G button and then D / E button to select the desired WXGA resolution.
Repeatedly press the MENU button to return to normal TV viewing.
RGB-PC Menu
EN
SPECIAL | SPECIAL |
SPECIAL
Language
CSM
PC Control
WXGA
VGA
Set ID
Caption
Caption/Text
Language
CSM
PC Control
WXGA
VGA
Set ID
Caption
Caption/Text
Clock 10 
Phase 15 
Auto
Reset
Language
CSM
PC Control
WXGA
VGA
Set ID
Caption
Caption/Text
1024X768 1280X768 1360X768 1366X768
()OO}{OOOKOOMENU()OO}{OOOKOOMENU
()OO}{OOOKOOMENU
29