Kreisen KR-370T owner manual Setup, External Control Device, Communication Parameters

Setup

- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and con- trol the set’s functions externally.

How to connect external control equipment Type of connector; D-Sub 9-pin male

External Control Device

< Side panel of the set >

RGB INPUT	AUDIO INPUT	DVI INPUT	RS-232C INPUT
			(CONTROL/SERVICE)

Connect the serial port of the control device to the RS- 232C jack on the set.

RS-232C connection cables are not supplied with the Monitor.

The Monitor remote control and front panel controls (except main power) will not be functional if the set is controlled by a PC computer or other external device.

No. Pin name

1No connection

2RXD (Receive data)

3TXD (Transmit data)

4DTR (DTE side ready)

5GND

6DSR (DCE side ready)

7RTS (Ready to send)

8CTS (Clear to send)

9No Connection

1

5

9

6

Communication Parameters

•Baud rate : 115200 bps (UART)

•Data length : 8 bits

•Parity : None

•Stop bit : 1 bit

•Communication code : ASCII code

32