Metz MF 72TL68, MF 82TL95 manual Menü

Page 44

Caution: connecting a new device may cause an existing connection to be modi- fied. If this happens, you will have to move the cables for the affected AV device to the correct positions.

☞

• Use the cursor control key to select the device you wish to connect to the TV set.

• Press the „OK“ key to confirm your selection and, in the setting window, set the parameters „Signal OUT“ and „Signal IN“ to match the AV device (see the operating instructions for the AV device for details).

• Press the „OK“ key. The newly connected device appears in the connection diagram.

Other device

• Press the yellow key to open the menu „AV devices“. In the factory, a video recorder is programmed for the EURO 1 socket and a DVD player for the EURO 2 socket. If you want to change these settings, you can select one of the AV devices with the cursor control key and delete it by pressing the ll key.

Connecting AV devices

• Press the „MENU“ key to open the TV menu.

Always connect AV devices exactly as

☞

In the menu „AV devices“, the setting window displays a list of all common AV units.

i

shown in the connection diagram in the TV menu of your TV set!

SVHS/Hi8 and Data Logic video recorders must always be connected as „Video recorder 1“. A

„normal“ VHS video recorder may be connected as „Video recorder 1“ or

DVD/Videorec. 1 „Video recorder 2“.

FBAS

Camcorder/Photo

DVD / CD FBAS

24. AV devices

AV (Audio/Video) devices are devices which provide picture and/or sound signals for play- back on your TV set (for example, video cas- sette recorders, DVD players, etc.).

Call the menu

MENU

OK

Menü

Picture-Volume

AV devices

Station table

Timer Configuration

Connect as follows:

Back of TV set


EURO1
	I I I I I I I I I I
	I I I I I I I I I I
EURO2	I I I I I I I I I I
EURO2	I I I I I I I I I I
	I I I I I I I I I I

Front of TV set 2)

TV-

Select device with		Select a new device:
cursor and call		Videorecorder 1	Decoder A
device attributes		DVD/Videorec. 2	Decoder B
with OK		DVD / CD	Satellite / SetTop

OK

44

Image 44

Contents Operating instructions ForewordContents Installation Safety notes Safety notes Remote control unit Most important keys in normal useOverview of key functions Setting the operating mode You can adjust the volume with the + keyDaily operation Will select this programme positionSelecting stations Call the menu Station selection and programme posi- tion managementCall the info 7. Help function Information Using the menus Call the menu Are displayed see the picture on Left. Otherwise, page 100 appearsSee the lower picture Case of „TOP stations, youTeletext Teletext subtitles Press the red key To open the menu „Configuration AV playbackPicture quality when playing back from tape machines Copying between AV devices Individual picture settings + key to change the setting3rd line in the setting window Save the new setting as the standardPress the TV key to close the TV menu Picture settings, generalUse the cursor control key to select Picture settings for a specific Programme position Timer ConfigurationSound settings, general Setting you want to changeSelection and then, in the setting win Press the „OK key and then selectSound settings for a specific programme position Colour standard Call the menu PAL, SECAM, NTSC, NTSC44, PAL60, PAL MCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Reminder Call the menu Press the „TV key to close the menuTimer control Picture-Volume AV devicesTimer control Call the menu Reminder Current date ChildlockSpecial functions Picture format Calling the picture format3 functionSpecial functions Zoom Special functions Picture positionEPG NexTView Not possible with an external satellite receiverActivating the EPG NexTView Call the menu II keyCollection operation is interrupted or cancelled if Collecting NexTView dataUsing NexTView Call the menu Call the menu Using NexTView Using NexTView Call the menu Recording a programme Selection Interest Users RecordHelp function Information are then Displayed in the selected languageProgramming stations Call the menu Programming stations Press the „MENU key Executing fine tuningSelect the desired programme position Each station which transmits VPS signals also Call the menu 22. Station logoWork correctly, or if you want a different station Logo, you can overwrite the logo manuallySorting stations Call the menu Copying, shifting and deleting stationsMenü AV devices Call the menu Call the menu AV devices Initial programme position Call the menu You can define a so-called initial programmePosition in this TV set. This is intended primarily to OptionSetting the operating scope Programming the operating scope Operation without the remote control unit Changing programme positions Press the -/+ keys VolumeOr + key to adjust the volume Contrast Or + key to adjust the contrast8 W Technical data12 W Options Connecting headphones Cleaning the TV setGlossary CTIStandard settings VCRSuch as camcorders and video recorders Forced mono Switch it on again Few seconds and thenLogic video recorder as Such as a DVD play Glossary AV playback, devices with switching voltageIndex Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class