Metz MF 72TL68, MF 82TL95 manual Executing fine tuning, Select the desired programme position

Page 41

21. Programming stations

wish to replace with the new station).

•Move the cursor to „Frequency/Channel“.

•Press the „OK“ key.

•In the setting window which is then displayed, move the cursor to „Channel“ or „Special chan- nel“.

•Enter the number of the channel or special channel with the numeric keys.

•Press the „OK“ key to save the station.

•Press the „TV“ key to close the menu.

Call the menu

MENU

OK

Fine tuning

When you programme stations, each channel is automatically tuned to the centre frequency. This

is normally sufficient. If this automatic

 

function does not produce satisfactory

 

results, you can carry out fine tuning.

Picture-Volume

Executing fine tuning

AV devices

Station table

 

• Select the desired programme position.

Timer

• Press the „MENU“ key.

Configuration

• Press the white key

to open the sta-

TVMenü-

 

 

 

 

 

 

 

 

Change value

Channel

6

Cable channel

--

 

 

 

tion table.

 

with + and –

 

 

Frequency 182.31 MHz

 

 

 

• Move the cursor to the subject card

Confirm with OK

 

 

Scan operation

 

 

ARD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

„Frequency/Channel“.

•Press the „OK“ key to confirm your selection.

•In the setting window, select „Frequency“ and use the - + key to change the frequency value until the picture is as clear as possible.

•Save the new setting by pressing the „OK“ key.

•Press the „TV“ key to close the menu.

OK

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Operating instructions ForewordContents Installation Safety notes Safety notes Most important keys in normal use Remote control unitOverview of key functions You can adjust the volume with the + key Setting the operating modeDaily operation Will select this programme positionStation selection and programme posi- tion management Selecting stations Call the menuCall the info 7. Help function Information Using the menus Call the menu Left. Otherwise, page 100 appears Are displayed see the picture onSee the lower picture Case of „TOP stations, youTeletext Teletext subtitles AV playback Press the red key To open the menu „ConfigurationPicture quality when playing back from tape machines Copying between AV devices + key to change the setting Individual picture settings3rd line in the setting window Save the new setting as the standardPress the TV key to close the TV menu Picture settings, generalUse the cursor control key to select Timer Configuration Picture settings for a specific Programme positionSetting you want to change Sound settings, generalSelection and then, in the setting win Press the „OK key and then selectSound settings for a specific programme position PAL, SECAM, NTSC, NTSC44, PAL60, PAL M Colour standard Call the menuCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Press the „TV key to close the menu Reminder Call the menuPicture-Volume AV devices Timer controlReminder Current date Childlock Timer control Call the menuCalling the picture format3 function Special functions Picture formatSpecial functions Picture position Special functions ZoomNot possible with an external satellite receiver EPG NexTViewII key Activating the EPG NexTView Call the menuCollecting NexTView data Collection operation is interrupted or cancelled ifUsing NexTView Call the menu Call the menu Using NexTView Selection Interest Users Record Using NexTView Call the menu Recording a programmeDisplayed in the selected language Help function Information are thenProgramming stations Call the menu Programming stations Press the „MENU key Executing fine tuningSelect the desired programme position Call the menu 22. Station logo Each station which transmits VPS signals alsoWork correctly, or if you want a different station Logo, you can overwrite the logo manuallyCopying, shifting and deleting stations Sorting stations Call the menuMenü AV devices Call the menu Call the menu AV devices You can define a so-called initial programme Initial programme position Call the menuPosition in this TV set. This is intended primarily to OptionSetting the operating scope Programming the operating scope Changing programme positions Press the -/+ keys Volume Operation without the remote control unitOr + key to adjust the volume Contrast Or + key to adjust the contrast8 W Technical data12 W Options Cleaning the TV set Connecting headphonesCTI GlossaryVCR Standard settingsSuch as camcorders and video recorders Forced mono Few seconds and then Switch it on againLogic video recorder as Such as a DVD play Glossary AV playback, devices with switching voltageIndex Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class
Top Page Image Contents