Metz MF 72TL68, MF 82TL95 manual Remote control unit, Most important keys in normal use

Page 6

3. Remote control unit

The remote control unit transmits com- mands to the TV set with the aid of infra- red light. You should always point the remote control unit directly at the TV set. The remote control unit may possibly interfere with other infrared devices (such as infrared headphones) within its range. Sunlight falling directly on the TV set may interfere with the operation of the remote control unit, because the TV set cannot detect the infrared signals from it. The TV set must first be switched on with the main switch before the remote control unit can be used.

The most important keys in normal use

ON:

with programme position 1 or the pro- grammed initial programme position selected.

OFF (standby)

Numeric keys (direct station selection)

P+ / P-: next/previous programme position

Volume control

Also used to change settings in the menu

Return to previously selected program- me position

Display the station table

Never load rechargeable batteries into the battery compartment of the remote control unit!

Only use two 1.5V LR03/AM4 batte- ries, size AAA.

6

Image 6

Contents Operating instructions ForewordContents Installation Safety notes Safety notes Remote control unit Most important keys in normal useOverview of key functions Daily operation Setting the operating modeYou can adjust the volume with the + key Will select this programme positionSelecting stations Call the menu Station selection and programme posi- tion managementCall the info 7. Help function Information Using the menus Call the menu See the lower picture Are displayed see the picture onLeft. Otherwise, page 100 appears Case of „TOP stations, youTeletext Teletext subtitles Press the red key To open the menu „Configuration AV playbackPicture quality when playing back from tape machines Copying between AV devices 3rd line in the setting window Individual picture settings+ key to change the setting Save the new setting as the standardPicture settings, general Use the cursor control key to selectPress the TV key to close the TV menu Picture settings for a specific Programme position Timer ConfigurationSelection and then, in the setting win Sound settings, generalSetting you want to change Press the „OK key and then selectSound settings for a specific programme position Colour standard Call the menu PAL, SECAM, NTSC, NTSC44, PAL60, PAL MCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Reminder Call the menu Press the „TV key to close the menuTimer control Picture-Volume AV devicesTimer control Call the menu Reminder Current date ChildlockSpecial functions Picture format Calling the picture format3 functionSpecial functions Zoom Special functions Picture positionEPG NexTView Not possible with an external satellite receiverActivating the EPG NexTView Call the menu II keyCollection operation is interrupted or cancelled if Collecting NexTView dataUsing NexTView Call the menu Call the menu Using NexTView Using NexTView Call the menu Recording a programme Selection Interest Users RecordHelp function Information are then Displayed in the selected languageProgramming stations Call the menu Programming stations Executing fine tuning Select the desired programme positionPress the „MENU key Work correctly, or if you want a different station Each station which transmits VPS signals alsoCall the menu 22. Station logo Logo, you can overwrite the logo manuallySorting stations Call the menu Copying, shifting and deleting stationsMenü AV devices Call the menu Call the menu AV devices Position in this TV set. This is intended primarily to Initial programme position Call the menuYou can define a so-called initial programme OptionSetting the operating scope Programming the operating scope Or + key to adjust the volume Contrast Operation without the remote control unitChanging programme positions Press the -/+ keys Volume Or + key to adjust the contrastTechnical data 12 W8 W Options Connecting headphones Cleaning the TV setGlossary CTIStandard settings VCRSuch as camcorders and video recorders Forced mono Switch it on again Few seconds and thenLogic video recorder as Such as a DVD play AV playback, devices with switching voltage IndexGlossary Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class